Roundo PS-310/12 Hydraulic Plate Bending Roll 3 Roll – Year 1985
| ROUNDO Plate Bending Machines Type PS – Capacities and Specifications | ||||||||
|---|---|---|---|---|---|---|---|---|
| Machine Size | Prebending Capacity | 3 x Top Roll Ø | 5 x Top Roll Ø | 3000 – 5000 mm | Top Roll Diameter | ITR Min. Ø | Motor | Net / Gross Weight |
| 205 | 1500 x 6 mm | 1500 x 10 mm | 1500 x 12 mm | 1500 x 14 mm | 205 mm | 140 mm | 4 kW | 3.2 / 3.6 tons |
| 230 | 1500 x 8 mm | 1500 x 13 mm | 1500 x 15 mm | 1500 x 17 mm | 230 mm | 180 mm | 5.5 kW | 4.6 / 5.1 tons |
| 255 | 1500 x 10 mm | 1500 x 16 mm | 1500 x 18 mm | 1500 x 19 mm | 255 mm | 170 mm | 5.5 kW | 4.9 / 5.4 tons |
| 280 | 1500 x 12 mm | 1500 x 20 mm | 1500 x 22 mm | 1500 x 23 mm | 280 mm | 190 mm | 7.5 kW | 6.3 / 6.9 tons |
| 310 | 1500 x 14 mm | 1500 x 23 mm | 1500 x 25 mm | 1500 x 27 mm | 310 mm | 220 mm | 11 kW | 6.8 / 7.4 tons |
| 340 | 1500 x 20 mm | 1500 x 26 mm | 1500 x 29 mm | 1500 x 32 mm | 340 mm | 240 mm | 22 kW | 11.1 / 11.8 tons |
| 360 | 1500 x 26 mm | 1500 x 30 mm | 1500 x 34 mm | 1500 x 38 mm | 360 mm | 260 mm | 22 kW | 12.3 / 13.1 tons |
| 390 | 1500 x 32 mm | 1500 x 37 mm | 1500 x 44 mm | 1500 x 46 mm | 390 mm | 300 mm | 30 kW | 14.4 / 15.3 tons |
| 460 | 1500 x 38 mm | 1500 x 46 mm | 1500 x 54 mm | 1500 x 56 mm | 460 mm | 370 mm | 37 kW | 24.0 / 25.2 tons |
| 500 | 1500 x 45 mm | 1500 x 53 mm | 1500 x 62 mm | 1500 x 65 mm | 500 mm | 420 mm | 50 kW | 29.8 / 31.3 tons |
| 550 | 1500 x 51 mm | 1500 x 68 mm | 1500 x 80 mm | 1500 x 85 mm | 550 mm | 460 mm | 60 kW | 35.0 / 36.8 tons |
| 600 | 1500 x 66 mm | 1500 x 78 mm | 1500 x 93 mm | 1500 x 96 mm | 600 mm | 500 mm | 75 kW | 42.0 / 44.0 tons |
| Notes: • Capacities are based on normal steel with yield point 270 N/mm² (38,000 psi). • Minimum bending diameter is approximately 1.1 – 1.4 × top roll diameter depending on plate thickness. • Remaining straight end after prebending: approximately 1.5 – 2 × plate thickness. • Other machine lengths available upon request. • Specifications subject to change without prior notice. |
||||||||
| Roundo PS-310/12 Hydraulic Double Pinch Plate Bending Roll | ||
|---|---|---|
| Manufacturer | Roundo | |
| Model | PS-310/12 | |
| Country of Origin | Sweden | |
| Machine Type | Hydraulic Double Pinch Plate Bending Roll | |
| TECHNICAL SPECIFICATIONS | ||
| Maximum Bending Capacity | 0.5 in x 120 in | 12.7 mm x 3048 mm |
| Maximum Bending Angle | 360 Degrees | |
| Top Roll Diameter | 12 in OD | 305 mm OD |
| Working Length | 144 in | 3658 mm |
| Main Motor Power | 20 HP | 15 kW |
| Control Type | Manual Control Unit with Handheld Pendant Controls and DRO | |
| Hydraulic Roll Gap Adjustment | Yes | |
| Hydraulic Drop End | Yes | |
| Serial Number | MSN 853770 | |
| Estimated Gross Weight | 30000 lb | 13608 kg |
| ADDITIONAL INFORMATION | ||
| Machine is available due to upgrade to a larger plate roll. | ||
| Buyer is responsible for arranging and paying all freight charges. | ||
| Flatbed truck required for transportation. | ||
| Tarped load strongly recommended to protect the machine from weather conditions during transport. | ||
| Seller will load the machine free of charge. | ||
