RCM Hydraulic H-frame 4 Columns Hot Press 1200 Ton – Year 2011
| GENERAL INFORMATION | |
| Machine Type | Hydraulic Hot Press – CE Certified |
| Nominal Pressing Force | 1200 tons |
| Configuration | Two-plate (1 fixed + 1 moving), single daylight |
| Installation Type | Above-floor installation (no foundation required) |
| HEATED PLATES | |
| Plate Size | 3000 × 2000 mm |
| Maximum Temperature | 130 °C |
| Heating Power | 15 kW |
| Temperature Control | PT100 sensors, 4 independent controllers |
| PRECISION & MECHANICS | |
| Plate Machining Tolerance | Max. 0.05 mm/m |
| Plate Deflection (Full Load) | Max. 0.1 mm/m at 1200 tons |
| Pressing Cycle Capability | Up to 10 hours continuous pressing |
| HYDRAULIC SYSTEM | |
| Hydraulic Pump | PVPC-4046-LQZ – 67 l/min |
| Maximum Hydraulic Pressure | 25 MPa |
| Working Pressure | 100 kg/cm² |
| Oil Tank Capacity | 700 liters |
| Main Hydraulic Motor Power | 15 kW |
| PRESSING LOGIC | |
| Closing Speed | ≤ 30 mm/s |
| Pressing Speed | ≤ 1 mm/s |
| Pressure Control | Automatic pressure maintenance and recovery |
| White Cycle | 15 tons pressing by plate weight only (no hydraulic power) |
| CONTROL & AUTOMATION | |
| Control System | PLC controlled |
| System Type | Analog wiring with relays, solenoid valves and probes |
| COOLING SYSTEM | |
| Cooling Type | Air / Water cooling |
| SAFETY & ELECTRICAL | |
| Safety System | Photocells, manual push-buttons, full grounding |
| Power Supply | 400 V – 3 Phase – 50 Hz |
| Protection Class | IP55 |
| DIMENSIONS & WEIGHT | |
| Overall Dimensions (L × W × H) | 3100 × 2400 × 4000 mm |
| Machine Weight | Approx. 60,000 kg (without oil) |
| GENERAL INFORMATION | |
| Year of Construction | 2011 |
| Condition | Used |
| Functionality | Fully functional |
| Operating Hours | 1,000 h |
| TECHNICAL DETAILS | |
| Pressing Force | 1,200 t |
| Stroke Length | 600 mm |
| Daylight | 700 mm |
| Distance Table to Ram | 700 mm |
| Distance Between Columns | 2,200 × 1,260 mm |
| TABLE & RAM | |
| Table Size (W × L) | 3,000 × 2,000 mm |
| Table Height | 700 mm |
| Ram Plate Size (W × L) | 800 × 600 mm |
| DIMENSIONS & WEIGHT | |
| Overall Dimensions (L × W × H) | 3,000 × 2,000 × 4,200 mm |
| Total Weight | 60,000 kg |
| ELECTRICAL DATA | |
| Input Voltage | 380 V |
| Input Current Type | Three-phase |
| Installed Power | 15 kW |
| HYDRAULICS | |
| Oil Tank Capacity | 700 l |
| SAFETY & EQUIPMENT | |
| Machine Frame | H-frame, 4-column design |
| Safety Equipment | Safety light barrier |
