Prima Power Express Bender EBe3820 – Year 2019
|
EBe2220 EBe2226 |
EBe2720 EBe2726 |
EBe3320 EBe3326 |
EBe3820 EBe3826 |
|
|---|---|---|---|---|
| Maximum bending length | 2,250 mm | 2,750 mm | 3,350 mm | 3,800 mm |
| Maximum sheet length | 2,850 mm | 2,850 mm | 3,850 mm | 4,000 mm |
| Maximum sheet width | 1,500 mm | 1,500 mm | 1,700 mm | 1,700 mm |
| Maximum panel diagonal | 3,000 mm | 3,000 mm | 3,950 mm | 4,000 mm |
| Maximum bend height |
204 mm 264 mm |
|||
| Maximum re-entering bend | 55 mm | |||
| Bending force | 32 t (320 kN) | 41 t (410 kN) | ||
| Clamping force | 52 t (510 kN) | 52 t (510 kN) | 90 t (890 kN) | 100 t (980 kN) |
| Max. thickness, Steel UTS 410 N/mm² | 3.0 mm | 3.2 mm |
3.0 mm* 3.2 mm** |
2.0 mm* 3.2 mm** |
| Max. thickness, Stainless steel UTS 680 N/mm² | 2.0 mm | 2.2 mm |
2.0 mm* 2.2 mm** |
1.5 mm* 2.2 mm** |
| Max. thickness, Aluminium UTS 265 N/mm² | 4.0 mm | 4.0 mm |
3.5 mm* 4.0 mm** |
3.0 mm* 4.0 mm** |
| Minimum thickness | 0.5 mm | |||
| Average absorbed power | 6.5 kWh | 7 kWh | ||
I. EBe3820 (FM) Express Bender – TCS Version
- ATC Automatic Tool Change – TCS version
- Express bender with maximum bending length of 149″ (3,800 mm) and maximum bending height of 8.00″ (203 mm)
- Rigid welded frame construction
- Lower tool mounted directly on the frame
- Servo-driven upper tool with vertical movement
- HTC hydraulic upper tool clamping system
- Programmable crowning system for upper tool and bending blade
- Programmable positioning pins
- Servo motor cooling unit
- High-speed servo motors
- Brush table tops
- Control cabinet cooler
- UPS control battery backup
Upper Tooling – Included (1 Set)
- Two (2) mobile end tools – 96 mm each
- Two (2) fixed tools – 20 mm each
- One (1) central wedge – 110 mm
- Ten (10) spacing segments – 4 mm each
- One hundred forty-two (142) standard segments – 24 mm each
Additional Features
- ASP additional short blades
- ASP carriages – pair, 900 mm SBL (standard blade locking)
- CLL for ATC reversed bending sequence
- UBC upper bridge clamp
- LBN last negative bend function
- PCD8 part centering device (includes folding doors with safety lock)
- BTD8 bending turning device
- PCD8W single wagon
- Lifting door for continuous production
II. Loading System
- Suction cup loading lifter
- ALT automatic loading device setup
- PCD connection
III. Unloading System
- Unloading conveyor for bent parts
- TUT tilting unloading table
IV. Tooling
- Type S5 – ASP tool kit
- Type S5 – One (1) piece, 500 mm length
V. Software & Teleservice
- One (1) seat of MasterBend 2D programming software (installed on machine)
- NCX Unfolder 3D for bending
- MasterBend 3D software license for offline programming
- Teleservice connectivity package for CNC control(remote access for troubleshooting support, free of charge during warranty period)
This proposal and its attachments contain proprietary information and may not be reproduced,
distributed, or disclosed to third parties without prior written authorization.
Technical specifications are subject to change without prior notice.
