PEE-WEE P24Q Thread Rolling Machine 24 Ton – Year 2004
Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine
Manufacturer PEE-WEE Type P 24 Q
Serial No. LC2403099
Year of manufacture 2004
Maximum rolling force: 24 tons
Maximum tool diameter: 200 mm
Rolling spindle diameter: 69.85 mm
Tool bore diameter: 70 mm (nominal diameter)
Mounting length, tool length: max. 180 mm
Maximum workpiece diameter: 50 mm
Rolling spindle speed: 22 – 44 – 95 – 190 rpm
Hydraulic motor power: approx. 3 kW
Roller drive motor power: 5.5 kW
Power supply: 400 volts, 50 Hz
– Pivoting rolling spindle for thread through-feed rolling
– Rolling spindle speed in 4 steps via gear shifting
– Hydraulic system integrated into the machine bed
Space requirement: L x W x H: 2000 x 1750 x 2550 mm
Weight: approx. 3 tons
Good condition
Penetration rolling: Thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece to the nominal diameter.
The maximum thread length is as long as the rolling tool is wide.
Through-feed rolling: When the thread length is greater than the rolling tool width.
Through-feed tools have three sections: the inlet, the calibration section, and the outlet.
Grooved rolls have no pitch and are pivoted at the pitch angle of the profile to be rolled.
Pitched rollers differ from grooved rollers in that they have a pitch in their profile.
The sum of the pitch angle and the swivel angle determines the pitch angle in the workpiece.
