Okuma LT2000 EX CNC Turning Center Twin Turret Double Spindle – Year 2012
| Specification | Metric | Imperial |
|---|---|---|
| Machine Type | CNC Turning Center (Twin Spindle, Twin Turret) | CNC Turning Center (Twin Spindle, Twin Turret) |
| CNC Control | OSP-P200LA (15″ Touch Display) | OSP-P200LA (15″ Touch Display) |
| Number of Spindles | 2 | 2 |
| Spindle Power | 11 / 7.5 kW | 14.75 / 10.05 HP |
| Spindle Speed | 50 – 6,000 RPM | 50 – 6,000 RPM |
| Spindle Bore | 62 / 100 mm | 2.44″ / 3.94″ |
| Spindle Nose | 140 Flat | 140 Flat |
| C-Axis Control | 360° (0.001° increment) | 360° (0.001° increment) |
| Y-Axis (Upper Turret) | 95 mm (+50 / -45) | 3.74″ (+1.97″ / -1.77″) |
| Turret Configuration | Upper V16 + Lower V16 (Turning & Milling) | Upper V16 + Lower V16 (Turning & Milling) |
| Driven Tool Motor | 5.5 / 3.7 kW | 7.37 / 4.96 HP |
| Driven Tool Speed | 45 – 6,000 RPM | 45 – 6,000 RPM |
Equipped With
- Twin Spindle Configuration with Dual Chuck System
- Twin Turret (Upper & Lower, Both with Live Tooling)
- C-Axis on Both Spindles
- Y-Axis on Upper Turret
- Synchronized Tapping for Milling Tools
- Coolant System with 3 Pump Motors (0.8 kW each)
- Fully Enclosed Safety Guard with Door Interlock
- Chip Pan with Side Disposal
- Automatic Chuck Open/Close with Confirmation
- Chuck Air Blower System
- Lubrication Monitoring System
- Machine Lighting
- Foundation Pads & Leveling Screws
- Machine Lifting Hooks
Control & Software Features
- OSP-P200LA CNC with 3D Simulation
- Multitasking Coordinate Conversion
- Profile Generation
- Program Storage: 2 GB
- Operation Buffer: 2 MB
- Cycle Time Monitoring & Optimization
- Spindle & Axis Load Monitoring
- NC Operation Monitoring System
- Variable Spindle Speed Control
- Pitch Error Compensation (X, Y, Z)
- Inch / Metric Switching
- Workpiece Ejection Detection
- Status Indicator Lamp
Compliance & Additional Features
- CE Mark & EMC Compliance
- IEC Standard Compatibility
- CE Transformer for Local Power Adaptation
- Double Chuck Foot Pedal Operation
- Chuck Operation During Spindle Rotation
