Nakamura Tome WT-250 II MMY – Year 2008
CNC Turning Center
| Manufacturer | Nakamura Tome |
| Model | WT-250 II MMY |
| Year | 2008 |
| Condition | Used |
| Nakamura Tome WT-250 II MMY | CNC Turning Center |
| Control | Fanuc 31i-A |
| Chuck Sizes Main / Subspindle | 8″ Hyd / 6″ Hyd. Chucks |
| Maximum Swing | 16″ |
| Maximum Turning Diameter | 15.34″ |
| Maximum Turning Length | 17.12″ |
| Maximum Bar Capacity Left Spindle / Right Spindle | 2.56″ / 2.54″ |
| X1 / X2 Axis Travel | 7.67″ / 7.67″ |
| Y-Axis Travel Upper Turret | +/- 1.38″ |
| Z1 / Z2 Axis Travel | 18.9″ / 18.9″ |
| C Axis Spindle Rotation – Both Spindles | 0.001 degree |
| Number of Turrets | 2 Turrets |
| Number of Turret Positions | 12 Stations / 24 Positions – Both |
| Spindle Speed / Spindle Motor Left Spindle | 4,500 RPM / 25 HP |
| Spindle Speed / Spindle Motor Right Spindle | 4,500 RPM / 15 HP |
| Milling Spindle Speed / Milling Motor | 5,000 RPM / 7.5 HP |
| Machine Dimensions | Not Available |
| Machine Weight | 25,300 lbs. |
(1) 12 Position Upper Turret -Live Tool Capabilty
(1) Lower Turret with 12 Positions – Live Capability
Twin Spindle Design
Y Axis Capability on Upper Turret Only
Full C Axis on Both Spindles
Live Milling/Drilling Capability
Subspindle
8″ 3 Jaw Hydraulic Chuck on Main Spindle
6″ 3-Jaw Hydraulic Chuck on Sub Spindle
LNS Quick Load Servo 65 Short Magazine Barfeeder
Parts Catcher
Chip Conveyor
High Pressure Coolant System
All Available Manuals
Wired 200/220V Electrics
