Momentum MVL 16M CNC Vertical Lathe C-Axis – Year 2020
| Category | Specification | Units | Value |
|---|---|---|---|
| Capacities | Max. Swing Diameter | mm [inch] | 2,000 [78.74] |
| Max. Turning Diameter | mm [inch] | 2,000 [78.74] | |
| Height, Table to Clamp Pitch Line | mm [inch] | 1,780 [70.08] | |
| Height, Max. Turning (B79 Holder) | mm [inch] | 1,665 [65.55] | |
| Max. Workpiece Mass | kg [lb] | 10,000 [22,046] | |
| Controller and Motors | CNC Control | – | FANUC iT-Plus |
| Main Spindle Motor | kW [HP] | 55 / 45 (73.7 / 63) | |
| X and Z Axis Servo Motors | kW [HP] | 7 / 4.4 (9.3 / 6.1 reduction) | |
| Milling Spindle Motor, -M & -M only | kW [HP] | 22 / 18.5 (29.5 / 25) | |
| CF Axis Motor, -M only | kW [HP] | 7 / 9.3 (360:1 reduction) | |
| Table | Table Diameter | mm [inch] | 1,600 [62.99] |
| Low / High Gear Speed | RPM | 65 / 65 – 280 | |
| Max. Table Torque | N·m [ft.lb] | 24,000 [17,701] | |
| Tool Changer | Tool Capacity: Z-Axis / -M & -M | # of Tools | 16 / 15+1 Cover |
| Ram | Cross Sectional Area | mm [inch] | 255 x 254 [10 x 10] |
| Tooling Attachment Clamp Force | kN [lb.f] | 87kN (7.5) [17,422] | |
| Tooling Attachment Rotation | – | 4 bolt (40 Taper Curvic Coupling) | |
| Center Retention Stud Force | kN [lb.f] | 11 [2,496] | |
| Mill Spindle | Low / High Gear Steps, -M only | RPM | 1,570 / 486 = 30,000 |
| Max. Spindle Torque, -M / -M | N·m [ft.lb] | 820 [604] / 620 [455] | |
| Milling Tool Type, -M and -M | – | CAT 40 Tool Holder, CAT-50 | |
| Travels | Horizontal Travel, X Axis | mm [inch] | -1,020 – 1,165, ±40 = 15, 45.87 |
| Vertical Travel, Z Axis | mm [inch] | 1,500 [59.37] | |
| Cross Rail Travel, Steps, Positions | mm [inch] | +790 [29.3] ±3 steps, 4 pos. | |
| Feed Rates | Rapid Traverse Rate, X and Z Axis | m/min [in/min] | 10 [393.7] |
| Cutting Feed Rate | m/min [in/min] | 1 – 2,000 (0.039 – 78.74) | |
| Coolant Tank | CTS / Flood / Bed Wash Pumps | Bar [PSI], L/min | 6 / 87 and 100 [26] |
| Tank Volume | Liters [gallons] | 652 [157] | |
| Chip Flushing Basket / Secondary | um [inch] | 1000 [0.04] / 600 [0.024] | |
| Facility Related | Required Electrical Power | – | 3PH 460V ±10%, 60Hz ±1% |
| Main Breaker Size | – | 175 amps, 139 kVA @ 460V | |
| Machine Net Weight | kg [lb] | 36,800 [81,130] |
Momentum MVL 16M- 1600MM Vertical CNC Lathe With C Axis
1600 mm diameter
C axis
Machine is in excellent condition
1600mm chuck diameter
2000mm machining diameter
2150mm turning diameter
1600mm machining height
12 stations
5x turning stations
6x live tool stations
1896 hours of operating time
Fanuc control unit
8-ton part turning capacity
