USED MAZAK 4000 WATT MODEL FABRIGEAR 150 (8m) 3-D TUBE LASER

Installed New in November 2008

ITEM SPECIFICATIONS REMARKS Model Name Fabri Gear 150 Type Hybrid Type

X axis: Chuck Travel
Y axis: Beam Travel Maximum Machining Size Round Material

6” Square Material
6” Material and Part Weight Limit Maximum Total
727 lbs Maximum Per Foot
32 lbs For mild steel (Note 1) Height to Material Rotation Center 37.41” From floor level Axis Motion Stroke X: 352” / U: 345” / V: 91.14” Y: 38.78” / Z: 14.57” A: + 3600 / B: + 1350 Rapid Traverse X, U & V: Approx 3937 ipm Y: 1,417 ipm / Z: 1,181 ipm A: 96000/min / B: 96000/min C: Approx 200000/min

ITEM SPECIFICATIONS REMARKS

Axis Drive System AC servo motor: Digital servo drive X-axis: Rack & pinion Y & Z axis: Ball screws Positioning Accuracy X, U, & V axis: +0.0020 in./19.69 in. Y-axis: +0.0004 in./19.69 in. Repeatability X, U, & V-axis: +0.0004 in. Y & Z-axis: +0.0004 in. Machining Head Standard focal length 7.50” lens Z-axis Profiling Non-contact type Capacitance Note 1: Maximum cutting thickness, feedrate and edge quality vary depending on the variability of material chemistry and surface condition. Note 2: Provided that the recommended foundation work is carried out and the machine is Installed properly. 1. Material handling units Item

SPECIFICATIONS Remarks Fabri Gear 150 Quantity In-Feed Loader Supports 3 Out-Feed Unloader Supports 4 Transportable length Automatic Loader 135.83” to 314.96” Raw material must be delivered to the machine in one of these lengths Automatic Unloader 27.56”-314.96” Completed parts smaller than 27” will fall into a small parts catcher Manual Unload Any Part Smaller than 27” The automatic unloading conveyor cannot process parts of this size. Number of “V” Style Loader/Unloader Locations 5 Loads and unloads up to 5 pieces of material automatically Transportation Stroke 39.5” Transportation Speed Approx. 196.9ft/min Drive Method AC induction motor Material delivery method Manual operation