Mazak Integrex I 200 S CNC MultiTasking Turning-Milling Center – Year 2017
New spindel 2025-08
yearly service by Mazak Service center.
includes bar feeder Super 80
Max swing Ø 658 mm
Swing over X-slide Ø 658 mm
Swing when Y-axis is operating Ø 658 mm
Max turning diameter Ø 658 mm
Max turning diameter from bar Ø 51 mm (option Ø 65)
Max part length 1011mm
X axis: 615mm
Y axis: +/-130mm
z axis: 1077mm
B axis: 0,0001Deg / 240°
Spindle 1
Spindle nose JIS A2-6
Spindle bore 76 mm
Through-hole 51 mm (option Ø 65)
Spindle motor AC 22 kW 40% ED
Speed range 35-5000 rpm
Number of speed ranges Direct drive
Max torque 467 Nm 25% ED
Max part weight including chuck 300 kg
Center height from floor 1235 mm
Spindle 2
Spindle nose JIS A2-6
Spindle bore 76 mm
Through-hole Not applicable (option Ø 65)
Spindle motor AC 18.5 kW 40% ED
Speed range 33-5000 rpm
Number of speed ranges Direct drive
Max torque 325 Nm 40% ED
Max part weight including chuck 300 kg
Center height from floor 1235 mm
C-axis 1 Type Direct drive Rapid feed 555 rpm
Working feed 1-5000 degrees/min
Minimum programmable increment 0.0001 degree
C-axis 2 Type Direct drive Rapid feed 555 rpm
Working feed 1-5000 degrees/min
Minimum programmable increment 0.0001 degree
W-axis Movement 1066
Rapid feed 30 m/min
B-axis B-movement 240 degrees
Max machining feed (ISO) 40 rpm
Minimum programmable increment 0.0001 degree
Tool Holder Type: Tool changer
Tool Shank Size: 25 x 25 mm
Tool Change Time, tool to tool: 1.3 seconds
Chip-to-chip time, average: 8 seconds
Tool Holder for rotating tools: Capto C6
Tool Holder for turning tools: Capto C6
Max Tool Weight: 12 kg
Max Tool Length: 400 mm
Clamping Force for Tool (Capto C6): 33 kN
Tool Magazine: Number of tool positions: 36 pcs
Max Tool Diameter: 90 mm
Max Tool Diameter when the position before and after is empty: 125 mm
Max Tool Length: 400 mm
Max Tool Weight: 12 kg
Max Torque for Tool: 9.8 Nm
Other:
Length: 3990/4910 mm
Width: 2800 mm
Height: 2720 mm
Weight: 13100/16600 kg
Power Requirement, continuous: 72.34 kVA
Air Requirement, min: 5 kg/cm², 410 liters/min
Tool Magazine: 36 tools
Standard Equipment:
B-axis
Capto C6
ATC Auto Recovery
Auto power on/off, heating schedule
19” LCD touchscreen
Mazak tool identification system including 10 ID chips (for Capto C6)
Measurement arm for tool length setting, automatic compensation, and tool breakage detection
8” Chuck Type: Kitagawa B208A6
8” Chuck Type: Kitagawa B208A6
Coolant Tank
Coolant Pressure for Upper Turret: Max 5 bar, 23 l/min
Set of Manuals: (digital)
Smooth Standard Software:
Mazacc 2D software (shape comp)
Mazacc 2D software för roterande axlar (shape comp)
Mazacc 3D High Speed software
High Smoothing Control
Seamless Corner Control
Variable Acceleration Control
Ultra High Speed Machining Mode
Rapid Overlap
ISO/EIA Programming:
Lathe and milling spindle start unsynchronized
Synchronized threading with rotating tools
Macro interruption allowing event-driven ISO/EIA programs
Macro programming with 600 additional variable pairs for ISO/EIA
Helix interpolation for ISO/EIA
Coordinate rotation with G68 for ISO/EIA
Polar coordinates, G122 for ISO/EIA
Synchronized interpolation X-C-axis G12.1 for ISO/EIA
Coordinate systems G54 – G59 + 300 additional for ISO/EIA
Direct input of drawing dimensions, e.g. starting corner for ISO/EIA
Inverse Time Feed (G93)
3D Cutter Compensation (G40-G42)
