MAKINO ANC-3H2A-85 CNC Vertical Mill 3 Spindles – Year 2004

Table
The table forms the X-axis by moving its upper surface back and forth.

The moving surface is subjected to heat treatment and grinding.

The table surface is wide and flat, providing ample workspace to the left, right, and front.

Pendant Operation Panel
The NC operation panel and the machine operation panel are combined into a pendant.

The pendant arm can rotate, and the pendant head can swivel, offering excellent operability.

Main Dimensions and Numerical Values
Main Body of the Machine
Maximum Machining Dimensions
Length × Width × Height: 850 × 500 × 400 mm

Range of Motion
Table left/right direction (X-axis): 850 mm

Ram forward/backward direction (Y-axis): 500 mm

Knee up/down direction (Z-axis): 400 mm

From spindle center to table front edge: 85 ~ 585 mm

From spindle end to table surface: 145 ~ 580 mm

Table
Table size (Length × Width): 1350 × 480 mm

Number of T-slots × Width × Number: 18H8 mm × 5 slots

T-slot spacing: 80 mm

Maximum table load: 700 kg

Main Spindle
Please refer to “Main Spindle Head.”

Feed Speed
Minimum setting unit: 0.001 mm

Minimum Increment
0.001 mm

Cutting Feed Rate
0.1 ~ 2400 mm/min

Jog Feed Rate
1 ~ 2000 mm/min

Rapid Traverse Rate
Table (X axis), Ram (Y axis): 6000 mm/min

Knee (Z axis): 3000 mm/min

Machine Reference Point
Grid Detection Method

Reference Position

X axis: Table (+) End

Y axis: Ram (+) End

Z axis: Knee (+) End

Coolant Supply Device
Number of Nozzles: 3

Pump Discharge Amount: 9.5 L/min

Tank Capacity: 60 L

Effective Oil Amount: 17 L

Machine Main Body Weight
4400 kg

Motor and Power Supply
Motors
For Main Spindle Drive: Refer to “Main Spindle Head”

For Feed Shaft Drive:

AC 1.8 kW × 2

AC 3.3 kW × 1

For Coolant Pump: AC 180 W

For Lubrication Pump: AC 3 W

(2) Power Supply
AC 200/220V ± 10%

50/60 Hz

3-phase

(Model A) 37 kVA

(Model B, C) 26 kVA