HAAS Model VМ-3,
Software Version M18.24B,
Rotating and scaling the coordinate system
User-defined macros
Threading rigidly
Spindle orientation
High speed machining,
16MEG Memory Option Enabled memory extensions,
Hard drive
Connection to the Network
Table compensation
Max spindle rotation per minute – 12,000,
2015
4,000 hours
S.A.E METRIC ranges of motion
X axis 40.0 in 1016 mm
Y axis 26.0 in 660 mm
Z axis 25.0 in 635 mm
From the end of the spindle to the table (~ max) 29.2 in 742 mm
Spindle nose for table to table (~ min.) 4.2 in 107 mm
Max power 30.0 hp 22.4 kW
Max speed 12000 rpm
Type of Inline Direct-Drive
CT or BT 40 cone
Lubrication of Air / Oil Injection bearings
S.A.E METRIC table
Length 54.0 in 1372 mm
24.0 in 610 mm wide
T-slot width 0.630 in 16 mm
Distance from the center of the T-slots 3.94 in 100 mm
Number of standard tables with T-slots 13 in Y and 6 in X
Table load (evenly distributed) 4000 lb 1814 kg
Feedrates S.A.E METRIC
Cutting speed 500 ipm 12.7 m / min
Run-off speed at X 710 ipm 18.0 m / min
Run-on speed at Y 710 ipm 18.0 m / min
Speed of after-run on Z 710 ipm 18.0 m / min
Axis Motors S.A.E METRIC
Pressure X 4100 lbf 18238 N
Pressure Y 4100 lbf 18238 N
Pressure Z 4100 lbf 18238 N
Tool Changer S.A.E METRIC
SMTC type
30 + 1 capacity
Tool diameter (full adjacent socket) 2.5 in 64 mm
Tool diameter (adjacent seat empty) 5.0 in 127 mm
Tool length (from riveting line) 13 in 330 mm
Tool weight 12 lb 5.4 kg
Tool change time (avg) 2.8 s 2.8 s
Chip-chip tool change time (medium) 3.6 s 3.6 s
General data S.A.E METRIC
Coolant capacity 55 gal 208 L