HAAS MOD VF-3SSHE VERTICAL MACHINING CENTER
USED;
TECHNICAL SPECIFICATIONS:
Serial number: 1057109;
Numerical Control: HAAS;

COURSES
Longitudinal (X-axis): 1016 mm;
Transversal (Y-axis): 508 mm;
Vertical (Z-axis): 635 mm;
Distance from spindle nose to table top: 102 – 737 mm;

TABLE
Length: 1219 mm;
Width: 457 mm;
Maximum weight on table (evenly distributed): 3500 lbs;
T-slot width: 16 mm;
Distance from center of T-slot: 80.0 mm;
Number of standard T-slots: 5;

MANDREL
Cone size: CONE 40;
Max. speed: 12,000 rpm max;
Max. standard torque: 122 Nm at 2000 rpm
Bearing lubrication: Air/oil injection;
Cooling: Liquid cooled;
Maximum rated spindle motor power: 22.4 kW;
Guidance system: Direct-Drive in-line;
Maximum torque with optional gearbox: 339 Nm at 450 rpm;
Tapering: BT or CT 40;

AXIS MOTORS

Maximum rated thrust power
Maximum thrust X: 11343 N;
Maximum thrust Y: 11343 N;
Maximum thrust Z: 18683 N;
Rapid
Speeds on X: 25.4 m/min;
Rapids on Y: 25.4 m/min;
Rapids on Z: 25.4 m/min;
Maximum cut: 16.5 m/min;

TOOL CHANGE
Standard capacity: 20 (24+1,40+1);
Tool type/cone: CT or BT / 40;
Max. standard tool diameter (full/vacuum close): Ø 89 mm;
Maximum tool weight: 5,4 Kg;
Standard change type:Side carousel (SMTC 30 + 1 or 40 + 1 optional);
Tool to tool (avg): 4.2 seconds;
Swarf to swarf