Double column – hydraulic press ALPHA TEC – ALPHATEC type RPS 5000
built in 2006
Pressure force 500 ton.
Stand width front and rear 2520 mm
Table area 2500 x 2500 mm
Plunger area 2500 x 2500 mm
Stroke 600 mm
Height of 600 mm
Table height above floor approx. 900 mm
Fuel tank capacity approx. 1000 litres
RAM retraction force approx. ton 22.
Forward speed adjustable 100-800 mm / s
Pressure build-up to 5000 kN approx. 0.7 sec.
Rear hub speed approx. 300 mm / s
Motor power of main engine 75 kW
Engine power steering pump 2,2 kW
Power supply 400 Volt, 50 Hz
-8-way flat Guide for the beam
-Hydraulic plunger locking in the OT
-the control cabinet (200 x 50 cm)
-Electric control unit SIEMENS SPS S7-314
-Operation via SIEMENS OP 170-B (5.7 “)
-2-hand control panel opposite
-walk-in site
-Tabletop 2510 x 2530 x 135 mm (approx. 6700 kg)
-Central lubrication
-Manual with wiring diagrams
Dimensions L x W x H 372 x 260 x 460 cm
Space for transporting the L x W x H 460 x 372 x 260 cm
Weight approx. 50 ton
The machine was used to set glowing Stahflansche.
From insolvency – in very good condition
