Hyundai Wia LM1800TTSY – Year 2013
CNC Turning Center
| CNC Control | yes |
| Type of CNC Control | Fanuc 31i Model A |
| # Axis | 8 |
| Chuck Size | 8 inches |
| Swing | 11.4 inches |
| Turning Diameter | 9.1 inches |
| Center Distance | 26.5 inches |
| Bar Capacity | 2.6 inches |
| X Axis Travel | 6.5 inches |
| X2 Travel | 7.7 inches |
| Z Axis Travel | 27.6 inches |
| Z2 Travel | 28.3 inches |
| Y-Axis Travel | 7.5 |
| C1/C2 Axis Index | 0.001° |
| B Axis Travel (Sub Spindle) | 26.3 inches |
| Y Axis | yes |
| Spindle Nose | A2-6 |
| Spindle Speed | 5,000 rpm |
| Main Motor | 30 hp |
| Sub Spindle | yes |
| Sub Spindle Chuck Size | 8 inches |
| Sub Spindle Speed | 5,000 rpm |
| Sub Spindle Motor | 30 hp |
| Live Tooling | yes |
| Live Tooling Speed | 5,000 rpm |
| Live Tooling Motor | 7.5 hp |
| Tailstock (Yes/No) | no |
| Number Of Turrets | 2 |
| Turret Capacity | 24 Stations/ea |
| Dimensions | 144″ x 80″ x 83″ |
| Weight | 18800 pounds |
– Fanuc 31i Model A Control
– Collet Chuck on Main Spindle
– Collet Chuck on Main Spindle
– 8″ 3-Jaw Chuck on Sub Spindle
– (5) Live Holders – (2) Radial, (3) Axial)
– Misc Static Holders
– Tool Presetter
– Remote MPG
– Parts Catcher
– Parts Conveyor
– Chip Conveyor
– Mist Collector (NOT INCLUDED)
– Bar Feed Interface
– Coolant Tank & Pump
– Manual Guide i
– Custom Macro B
– Graphic Function
– Tool Geometry/Wear Offset
– Tool Life Management
– FMB Turbo 5-65 Bar Feeder (NOT INCLUDED)
– Custom Macro B
– Graphic Function
– Tool Geometry/Wear Offset
– Tool Life Management
– FMB Turbo 5-65 Bar Feeder (NOT INCLUDED)
