HWACHEON VT2000MCNC Vertical Turning Center C Axis – General Specifications |
|||
|---|---|---|---|
| Specification | Unit | Long Type | Short Type |
| Machining Capacity | |||
| Maximum Swing Diameter | mm | Ø2,650 | |
| Maximum Machining Diameter | mm | Ø2,500 | |
| Maximum Machining Height | mm | 2,100 | 1,100 |
| Axis Travels | |||
| X-Axis Travel (Ram Left / Right) | mm | -315 ~ +1,435 | |
| Z-Axis Travel (Ram Up / Down) | mm | 1,000 | |
| W-Axis Travel (Cross Rail Up / Down) | mm | 1,100 | 600 |
| Table | |||
| Maximum Table Speed | rpm | 1–55 (Low Range) / 56–240 (High Range) | |
| Table (Main Spindle) Motor | kW | 75 / 60 | |
| Maximum Torque | N·m | 49,863 | |
| Maximum Table Load | kg | 15,000 (C-Axis: 5,000) | |
| C-Axis Indexing Resolution | ° | 0.001° | |
| Ram / Milling Head | |||
| Milling Spindle Motor | kW | 26 / 22 (Optional: 35 / 30) | |
| Maximum Milling Spindle Speed | rpm | 3,000 | |
| Feed Rates | |||
| Rapid Traverse (X / Z / W) | m/min | 10 / 10 / 7.5 | |
| Cutting Feed Rate (X / Z) | mm/min | 1 ~ 2,000 | |
| Automatic Tool Changer | |||
| Tool Shank | – | BT50 Taper (7/24) | |
| Tool Magazine Capacity | Tools | 14 (Including 1 Docking Tool) | |
| Tool Size (Outside Turning Tool) | mm | □40 | |
| Maximum Tool Diameter | mm | Ø180 / Ø350 (Without Adjacent Tool) | |
| Maximum Tool Length | mm | 415 | |
| Maximum Tool Weight | kg | 60 | |
| HWACHEON VT2000M CNC Vertical Turning Center with C-Axis – Year 2018 | ||
|---|---|---|
| Specification | Metric | Imperial |
| Manufacturer | HWACHEON | HWACHEON |
| Model | VT2000M | VT2000M |
| Year | 2018 | 2018 |
| Table Diameter | 2,000 mm | 78.74 in |
| Maximum Swing Diameter | 2,650 mm | 104.33 in |
| Maximum Turning Height | 2,100 mm | 82.68 in |
| W-Axis Travel | 1,100 mm | 43.31 in |
| Z-Axis Travel | 1,000 mm | 39.37 in |
| Main Spindle Motor | 60 / 75 kW AC | 80.5 / 100.6 HP AC |
| Maximum Table Speed | 240 RPM | 240 RPM |
| Milling Spindle Motor | 22 / 26 kW AC | 29.5 / 34.9 HP AC |
| Maximum Milling Spindle Speed | 3,000 RPM | 3,000 RPM |
| C-Axis Positioning Resolution | 0.001° | 0.001° |
| Automatic Tool Changer (ATC) | 14 Tools | 14 Tools |
| CNC Control | Fanuc 31i-A | Fanuc 31i-A |
| Linear Scales | Equipped | Equipped |
| Features | ||
|
||
