Huron K2X8 – Year 2006
| Axis X | 650 mm |
|---|---|
| Axis Y | 700 mm |
| Axis Z | 450 mm |
| Type | Vertical |
| Type | Indexed |
| CNC | SIEMENS 840D |
| Type of axis | Universal head |
| Table length | 500 mm |
| Table width | 500 mm |
| Max. part weight | 500 kg |
| Number of tool pockets | 60 |
| Spindle taper | HSK63-A |
| Max. spindle speed | 24000 rpm |
| Spindle motor power | 18 kW |
| Weight | 11700 kg |
HURON K2X8-F MACHINING CENTER PART
Technical characteristics:
Year of manufacture: 2006
SIEMENS 840 D DIGITAL CONTROL
CNC milling center, 5 axes
Structural elements made of cast iron
Fixed portal structure with movable X-slide, bench with a 45 ° bi-rotating and Y-movable table (permissible load on the table = 500 kg), Z-slide that carries an electrospindle.
Stroke: X = 650 mm / Y = 700 mm / Z = 450 mm / axis A = -45 ° -180 ° / axis B = 360 °
Guides: Guide rails with 4 ball shoes on the X and Y axes and 6 roller shoes on the Z axis with recirculating ball bearings enable movement speeds of up to 50 m / min.
Feed control: linear axes controlled by digital AC motors and variators connected directly to the end of the precision ball screws. Rotary axes that are controlled directly by torque motors.
Centralized automatic lubrication of the ballscrew nuts
Electrical equipment: voltage 400 V ± 10% / neutral TN / frequency 50 Hz ± 2%
Hydraulic equipment for releasing the tool and unlocking the rotary axes
Incremental linear measurement with an optical ruler – resolution 0.001 mm
Measurement on the rotary axis with the rotary encoder – resolution 0.001 °
Spindle 24,000 rpm – 18 kW
Vibration monitoring on the electrospindle
Tool magazine 60 positions.
High frequency workpiece probe measuring system
NANO LASER tool probe on the structure
Ethernet network
ShopMil (conversation programming in 2 ½ axes)
SINCOM software (communication between CN and host computer)
Filtration unit with high pressure spray of 50 bar.
Low pressure irrigation through nozzles with irrigation tank and washing to recover chips
Wash the gun
Full fairing
Chip conveyor.
Central extraction of oil mist.
Machine weight: 9,700 kg + 2 tons (soluble plant)
When purchasing in 2006: The machine complies with the provisions of Directive 98/37 “Machines” in the amended version and its implementation by national legislation.
OPERATING AND SALES CONTEXT:
3×8 operation, an average of 8,000 parts / year
Preventive implementation every year (last carried out in M08 / 2019 change of the electrical control relay, change of the motor / HP sprinkler pump coupling, repair of the Y-axis telescopic housing, exchange of the HSK collet, various spare parts in stock)
Sale after investing in another means of production for replacement.
Available
NB: The C.U was coupled with a palletized EROWA ERS310 system (also available for sale).
WORK REQUIRED:
Repair of the turret control motor cooling tube (the machine works very well without motor cooling as it is used in “positioned” machining)
Interruption of the energies charged to MECAPACK
Handling (removal from your location to the exit of the workshop in front of the store) + loading and transport at the expense of the buyer)
