Hurco VC 500i CNC 5-Axis Vertical Machining Center
with Integrated ProCobot Robot Arm & Drawer System – Year 2021
| Machine Information | |
|---|---|
| Machine | Hurco VC 500i CNC 5-Axis Vertical Machining Center with Integrated ProCobot Robot Arm & Drawer System |
| Year | 2021 |
| Control | MAX 5 |
| Travels | |
| X-Axis Travel | 520 mm (20.5″) |
| Y-Axis Travel | 450 mm (17.7″) |
| Z-Axis Travel | 401 mm (15.8″) |
| Table | |
| Table Working Surface | 500 mm diameter (19.7″) |
| Maximum Table Load | 250 kg (550 lbs) |
| Floor to Table Surface | 866 mm (34.1″) |
| Spindle | |
| Spindle Type | VC500i |
| Spindle Taper | CAT40 |
| Spindle Speed | 12,000 rpm |
| Spindle Motor Power | 7.5 kW (10 HP) |
| Spindle Torque | 47.9 Nm (35.3 ft-lbs) |
| Spindle Nose to Table | 150 – 551 mm (5.9″ – 21.7″) |
| Axes | |
| B Axis Motion | -110° / +110° |
| C Axis Motion | 360° |
| B Axis Feed Rate | 25 rpm |
| C Axis Feed Rate | 25 rpm |
| Feedrates | |
| Rapid Traverse (X/Y/Z) | 24,000 mm/min (945 ipm) |
| Max Programmable Feedrate | 24,000 mm/min (945 ipm) |
| Least Command Increment | 0.00254 mm (0.0001″) |
| Accuracy | |
| Positioning Accuracy | ±0.005 mm (±0.0002″) |
| Repeatability | ±0.0025 mm (±0.0001″) |
| Tool Changer | |
| Tool Capacity | 30 tools |
| Tool-to-Tool Time | 2.5 seconds |
| Max Tool Diameter | 79 mm (3.1″) |
| Max Tool Length | 249 mm (9.8″) |
| General | |
| Coolant Capacity | 320 liters (84.5 gallons) |
| Air Requirement | 3–15 CFM @ 80–100 psi (5.5–6.9 bar) |
| Voltage | 230 VAC ±5% |
| Machine Dimensions (L x W x H) | 4140 x 3604 x 2929 mm (163″ x 141.9″ x 115.3″) |
| Machine Weight | 8,400 kg (18,520 lbs) |
