HI-RIB Panel Rafted Rollformer Line with Uncoiler
| AMERICAN UNCOILER | |
| Serial Number | 8611 |
| Model | 10 |
| Coil Capacity | 9072 kg (20,000 lbs) |
| Max Coil Width | 1219 mm (48.00 in) |
| Max Coil O.D. | 1524 mm (60.00 in) |
| Coil I.D. | 356 – 508 mm (14.00 – 20.00 in) |
| Powered Traversing | Yes |
| Operator Control Station | Yes |
| Drive Motor Power | 2.2 kW (3 HP) |
| AUTOQUIP COIL CAR | |
| Serial Number | 17518905 |
| Model | 24K18 |
| Coil Capacity | 8165 kg (18,000 lbs) |
| ROLLFORMER | |
| Tooling Type | HI-RIB Panel |
| Panel Thickness Capacity | 18 – 24 Gauge (approx. 0.48 – 1.21 mm / 0.019 – 0.048 in) |
| Number of Passes | 32 |
| Number of Rafts | 8 (4 passes per raft) |
| Roll Spacing | 1118 mm (44.00 in) |
| Horizontal Centers | 381 mm (15.00 in) |
| Vertical Adjustment | 178 – 254 mm (7.00 – 10.00 in) |
| Base to Bottom of Spindle | 203 mm (8.00 in) |
| Direction | Right to Left |
| Drive Type | Chain Driven |
| Gear Reducers | Philadelphia Gear Reducers |
| Base Construction | Fabricated Steel Base |
| Main Drive Motor | 44.7 kW (60 HP) |
| CONTROLS | |
| Operator Station | Yes |
| Controller | Durant Series 5884 |
| Rotary Dial Counter | Yes |
| STAMCO CUT-OFF PRESS | |
| Serial Number | 810-64 |
| Model | 3607 |
| Material Capacity | 30 – 12 Gauge (approx. 0.30 – 2.66 mm / 0.012 – 0.105 in) |
| Flying Cut-Off Die | Yes |
| Air Clutch | Yes |
| Main Drive Motor | 11.2 kW (15 HP) |
Hi-Rib Panel
- Economical medium profile roofing or siding panel
- Applies over open framing or solid substrate
- 36″ panel coverage
- Trapezoidal ribs 7″ on center
- 1 1/4″ bell top trapezoidal rib height
- Recommended minimum roof slope 3/12 pitch
- Anti-siphoning side lap
- Residential, light commercial and agricultural uses
- Class A fire resistance
- Class 4 hail impact resistance
- Available in Galvanized, Galvalume and Painted
- 24, 22, 20 and 18 gauge thickness available
