Haulick + Roos ROP 2500–3000 Precision Stamping & Forming Automatic Press – Year 2018
Haulick + Roos Precision Stamping & Forming Automatic Press
Model: ROP 2500–3000
Year of Manufacture: 2018
Technical Specifications
Nominal Press Force: 2,500 kN
Stroke Rate: 20 – 180 strokes/min
Press Table Size: 3,000 × 1,000 mm
Ram Clamping Surface: 3,000 × 950 mm
Max. Tool Installation Height: 500 mm
(at 200 mm stroke, bottom dead center)
Ram Adjustment Range: 150 mm
Standard Equipment
Fine ram adjustment with 0.01 mm accuracy, adjustable during operation
Hydraulic overload protection
Siemens Simotion PC-based control with 19″ touch screen
Press force display with monitoring function
8-cam cam controller
Press frame and ram made of spheroidal graphite cast iron (GJS/GGG)
Interface for strip feeding line integration
Accessories – Stamping & Forming Press
Planetary gearbox
Automatic stroke adjustment 20 – 160 mm
Stroke steps available:
40 / 48 / 57 / 66 / 77 / 88 / 99 / 109 / 120 / 130 / 140 / 149 /
157 / 160 / 172 / 178 / 184 / 189 / 200 mm
Vibration & Balancing System
Vibration damping elements
1 set consisting of 4 spring elements including VISCO damping
Rotating mass compensation
Dynamic balancing of rotating drive masses
Automatic adjustment when stroke height changes
Mechanical Design & Safety
8-point roller-guided ram
Two-piece bolster plate with manual adjustment system
Special work area safety enclosure
Lifting doors on front and rear with removable segments
Utilities & Interfaces
Blow-off device
Multiple power sockets and connections
230 V and 400 V (continuous and controlled)
Integration capability for 4 peripheral devices
Interfaces for box changer, camera system, and others
Strip Lubrication Preparation
Strip lubrication control via press control system
Wired interface using Harting connector
Line Integration
Interface prepared for TRUMPF laser system
Tool Monitoring & Protection – SAS 1600
PC-based tool monitoring system
16 digital inputs for sensor monitoring
Graphical visualization of signals and parameters
AUTO-SET function for automatic sensor signal learning
Extended tool monitoring
16 analog inputs for double-sheet detection
Press force monitoring with envelope curve (SAS-PK)
4-channel monitoring
Force curve displayed graphically on screen
Double dynamic envelope monitoring
Additional Equipment
8-cam cam controller with tool monitoring integration
Removable tool support arms
1 pair of SWT support consoles
Type: CT 06/1250
Load capacity per pair: 60 kN
Outreach: 1,250 mm
Color: RAL 2004 (Pure Orange)
With support foot
Tool Clamping System
Hydraulic tool clamping
6 clamping elements in ram T-slots
6 clamping elements in bolster plate T-slots
Total: 12 clamping elements
Tool Handling
Continuous ball transfer rails
2 full-length ball rails with quick-release couplings
With holders and limit switch monitoring
Mounted on the side of the press frame
High-Performance Roller Feeder
Model: Quantum 400-65-150
Technical Data
Max. Strip Width: 400 mm
Strip Thickness: 0.2 – 4.0 mm
Strip Entry Height: 100 – 200 mm above bolster plate
Additional Features
Automatic determination of catcher intermediate venting
Graphical analysis of feed movement
Feed fault detection and correction package
Commercial Terms
