HARTFORD HEP-3150 CNC Double Column 3-Axis Machining Center – Year 2016
| Table | |
|---|---|
| Working Surface | 3000 x 1400 mm / 118.11″ x 55.12″ |
| T-Slot (Size x Number x Pitch) | 22 mm x 7 x 180 mm / 0.87″ |
| Max Table Load | 10,000 kg / 22,046 lbs |
| Travel | |
| X-Axis Travel (Longitudinal) | 3,250 mm / 127.95″ |
| Y-Axis Travel (Cross) | 1,600 mm / 62.99″ |
| Z-Axis Travel (Vertical) | 780 mm / 30.71″ |
| Distance from Spindle End to Table Center | 160 – 940 mm / 6.30″ – 37.01″ (depending on column height) |
| Distance from Spindle Center to Column | 430 mm / 16.93″ |
| Distance Between Columns | 1600 mm / 62.99″ |
| Spindle | |
| Spindle Taper | BT50 (#50) |
| Spindle Speed (Gear) | 6,000 rpm (Optional 8,000 rpm) |
| Spindle Speed (DDS) | Optional 10,000 / 12,000 rpm |
| Feed | |
| Cutting Feedrate (X/Y/Z) | 12 / 12 / 12 m/min / 472 / 472 / 472 IPM |
| Rapid Traverse (X/Y/Z) | 20 / 24 / 20 m/min / 787 / 945 / 787 IPM |
| ATC (Automatic Tool Changer) | |
| Tool Storage Capacity | 32 / 40 Tools |
| Max Tool Weight | 18 kg / 39.68 lbs |
| Max Tool Size (Diameter x Length) | Ø125 x 300 mm / 4.92″ x 11.81″ Optional Ø200 x 300 mm (adjacent empty) |
| Tool Shank | BT50 (BBT / CAT / DIN) |
| Pull Stud | MAS-P50T-1 / CAT50 / DIN69872 |
| Motor | |
| Spindle Motor | 18.5 kW (Optional 22 / 26 kW) / 24.8 HP (Optional 29.5 / 34.8 HP) |
| Positioning Accuracy | |
| Positioning Accuracy (Full Travel) | ±0.010 mm / ±0.00039″ |
| Repeatability | ±0.003 mm / ±0.00012″ |
| Positioning Accuracy (VDI 3441) | 0.015 mm / 0.00059″ |
| Repeatability (VDI 3441) | 0.014 mm / 0.00055″ |
| General | |
| Required Air Pressure | 6.5 kg/cm² / 92 psi |
| Electric Power Consumption | 50 kVA |
| Machine Dimensions | 10,630 x 5,915.5 mm / 418.5″ x 232.9″ |
| Net Weight | 26,000 kg / 57,320 lbs |
| Coolant Tank Capacity | 480 L / 126.8 gal |
HARTFORD HEP-3150 CNC Double Column Machining Center
| Brand | HARTFORD |
|---|---|
| Model | HEP-3150 |
| Year Purchased New | 2018 |
| Control Unit | Hartrol Plus |
| Axis Travel | 3200 x 1600 mm / 125.98″ x 62.99″ |
| Guideways | 3-Axis Linear Guideways |
| Angle Head | Included |
| Condition | Good working condition |
| Status | Currently operating in workshop |
Description
This HARTFORD HEP-3150 CNC Double Column Machining Center was purchased new in 2018.
The machine is equipped with a Hartrol Plus control unit, 3-axis linear guideways, and an angle head.
It is currently working in the workshop without any known issues.
