HARDINGE VMC800II Vertical Machining Center
X-Axis travels 31.50.
Y-Axis travels 20.08.
Z-Axis travels 20.08.
Y-Axis throat distance 23.
Table width 20.00.
Table length 36.40.
Load capacity 1,540 lbs.
T-slots (# & size) .708 x 3 x 6.3.
Spindle taper 40.
Spindle speed range 10,000 rpm.
Transmission belted.
Motor (cont/peak) 10 /15 hp.
Max torque at base speed 39 ft-lb.
Air blast yes.
Automatic tool changer type carousel.
Tool capacity 20.
Tool type ansi / cat-v.
Pull stud type ansi/ cat.
Tool selection bi-directional.
All electric cam driven atc yes.
Maximum tool dia (full drum) 3.5.
Maximum tool dia (adjacent pockets empty) 6.
Maximum tool length .84.
Maximum tool weight 13.2 lbs.
Tool to tool 3 seconds.
Chip to chip 6.4 seconds.
Servo motors x, y, z 1.9 hp.
Ball screw size /support fixed pretension.
X-axis 32 mm.
Y-axis 32 mm.
Z-axis 32 mm.
Ball screw pitch 10 mm.
HARDINGE VMC 800 II – Year 2001