HARDINGE CONQUEST T 42 SP – Year 1997
| Turning length | 300 mm |
|---|---|
| Turning Ø | 150 mm |
| Ø above transversing slide | 300 mm |
| Type of CNC | FANUC 18 T |
| X-axis | 380 mm |
| Z-axis | 190 mm |
| Spindle taper | VDI 30 |
| Spindle bore | 48 mm |
| Number of turrets | 12 |
| Turning speed | 6000 rpm |
| Spindle motor power | 11 kW |
| Tailstock | no |
| Bar feeder | no |
| Weight | 7500 kg |
CNC-Hard Turning Machine with WP-Loader
Maker HARDINGE (USA)
Type CONQUEST T 42 SP
very good. Machine can be inspected under power
Swing Ø above slide, max. approx. 300 mm
Max. Workpiece Size using collet chuck Ø x Length 140 x 270 mm
Max. Turning Length approx. 300 mm
Spindle bore 48 mm
Material admission 42 mm
Spindle speeds, infinitely variable 60 -6,000 rpm
Turret: 12-position for square shaped Cutting Tool tips 25 x 25 mm and for shaft shaped cutting Tools VDI 30 with some tool holders mounted on the outer diameter of the turret.
Turret slide travel, longitudinal Z Axis / cross X Axis 380 / 190 mm
Feed speeds, Z / X / Y 38 / 28 m/min
Feed power, Z / X / Y 6,5 / 5 kN
Tool holder shank square / round 25 / 32 mm
Indexing time from station to station 0.36 sec
Sub Spindle Head
Spindle bore / spindle nose 42 mm
Synchronized spindle speeds 60- 6.000 mm
Feed rates for Z / X axis 38/28 m/min.
Feed Torque Rate Z/X/Y 6,5/5 kN
Spindle drive 11/7,5 kW
Total electrical load, approx. 23 kW – 400 V – 50 Hz
Accessories / Special Features
FANUC CNC Control in 2 axes, Model 18 T, with colour monitor and all of the usual multi-tasking functions, graphics, cycles and subprograms, etc.
The Main spindle is equipped with a Quick Change Collet Device, prepared for the automatic loading and unloading of Workpieces
Equipped with a SUB SPINDLE opposite of main spindle allows end working on workpieces
12-Station Turret Head with some tool holders but no live tools
Built in chip conveyor, Ampere meter for main and sub spindle outside on the control panel
Optical adjustment device for exact tool setting, Lockable sliding doors, CE Sign
