Gildemeister GAC-100
Used universal single-spindle numerically controlled lathe  ,
made in Germany in 1994, CNC ELTROPILOT EP8S and bar feeder IRCO 100.6/270.6
Spindle rotation with speed of 35-3150 rpm.
The following tools are supplied with the machine :
1. Chip conveyor
2.electrical cabinet
3.guide rail
4.Disassembled pump and emulsion system.
5.Documentation

Spindle head
Spindle diameter 100 mm
Spindle flange diameter 190 mm
Spindle bore diameter 112 mm
Diameter of front bearing 150 mm
Main drive
Power 22,5 kW
Torque 340 Nm
Speed range 35…3150 min-1
Cross slide I and II
Guide rail 70 mm
Fast motion mode 14 m/min.
Maximum feed speed 5 m/min.
Feed force 650 decN
Displacement resolution 0,001 mm
Cross slide II and IV
Slide guide 70 mm

Slide guide, length 164 mm
Fast motion mode 14 m/min.
Maximum feed rate 5 m/min.
Feed force transversal / longitudinal 650/600 decN
Position resolution 0.001 mm
Revolving slide
Slide guide, cross/side 70/274 mm
Fast motion mode 7.5/16 m/min.
Maximum feed speed 5 m/min.
Feed force transversal/lateral 600/950 deckN
Displacement