Doosan Puma TT-1800SY – Year 2007

Twin Spindle Twin Turret
8 Axis Turn/Mill Lathe

Full C Axis Spindle Rotation – Both Spindles
Live Milling/Drilling Capability – Both Turrets
Y Axis Capability on Upper Turret

Twin Turret Design with Upper and Lower Turrets

Dual Spindle Design

LNS Servo S2 Short Load Barfeeder

(2) 8″ 3 Hydraulic Chucks on both Spindles

Tool Presetter

Parts Catcher

Parts Exit Conveyor

Chip Conveyor

Ethernet Interface

PCMCIA Card Interface
RS 232 Port Interface

3 Color Machine Status Condition Lights

Boxed Ways

Coolant Tank with Pump
All Available Manuals

(2) Live Tool Holders – (1) Axial and (1) Radial each

(2) Turning Holders

(3) Single Position Boring Holders

(1) Double Position Boring Holder

Wired 200/220V Electrics

Mist Buster in Photos is NOT included

Manufactured New in September of 2007

Upper Turret Cutting Hours 19,208

Lower Turret Cutting Hours 7,010

Specifications

Manufacturer: Doosan
Model: Puma TT1800SY
Year: 2007
Condition: Used

Control: Fanuc 18i-TB Control
Chuck Size: 8″ Hydraulic Chuck on both Spindles
Maximum Swing over Bed: 9.05″
Maximum Cutting Diameter: 9.05″
Maximum Machining Length: 9.1″
Distance Between Spindles: 38.582″
Maximum Bar Capacity: 2.625″
X1-Axis Travel / X2-Axis Travel: 6.5″ / 7.5″
Y-Axis Travel: 3.93″
Z1-Axis Travel / Z2-Axis Travel: 31.5″ / 28.3″
C Axis Spindle Rotation: 0.001 Degrees – both Spindles
A-Axis Travel – Subspindle: 30.3″
Spindle Nose / Spindle Bore: A2-6″ / 3.0″ – both Spindles
Main & Subspindle Speeds: 5,000 RPM
Spindle Motor – Both Spindles: 30 HP
Rotary Tool Speed / Rotary Motor: 5,000 RPM / 7.5 HP
Number of Turret Positions: 12 Station Turret – Each
Rapid Traverse Rates X / Y / Z: 787 IPM / 295 IPM / 984 IPM
Machine Dimensions: 154″ x 82″ x 98″
Machine Weight: 17,196 lbs.