Doosan NHP 4000 – Year 2021
CNC Horizontal Machining Center with Full 4th Axis Rotary Table , 2 Pallet Changer System
| Manufacturer | Doosan |
| Model | NHP 4000 |
| Year | 2021 |
| Condition | Used |
| Doosan NHP 4000 | CNC Horizontal Machining Center |
| Machine Control | Fanuc 31iB |
| Pallet Size / Number of Pallets | 15.7″ x 15.7″ / 2 Pallets |
| Maximum Table Load | 660 lbs. |
| Pallet Indexing | .001 Degree Full 4th Axis |
| Maximum Workpiece Size D x H | 24.8″ x 35.4″ |
| X-Axis Travel | 22″ |
| Y-Axis Travel | 25.2″ |
| Z-Axis Travel | 26″ |
| Spindle Taper | CAT #40 |
| Spindle Speeds | 15,000 RPM |
| Spindle Motor | 40.2 HP |
| Number of Tool Positions | 60 Station Tool Changer |
| Rapid Traverse Rates | 2362 IPM |
| Cutting Feedrates | 2362 IPM |
| Machine Dimensions | 194″ x 90.6″ x 105.9″ |
| Machine Weight | 21,384 lbs. |
2 Pallet Changer System
Full 4th Axis Rotary Table
Coolant Through the Spindle
Renishaw RMP60 Spindle Probe
100mm Probe Stylus and Hardware
60 Station Tool Changer
Chip Conveyor-LNS Rear Discharge Filtering Type
Broken Tool Detection
BK Mikro Scanner Unit
I/O Card and Mounting Unit
Rigid Tapping
Remote Jog Handle
Spindle Orientation
Work Light
Wired 220V Electrics
112 Kva Step Down Transformer (480V Primary/208V Secondary)
All Available Manuals
ONLY 298 POWER ON HOURS
ONLY 24 RUN HOURS
ONLY 19 CUTTING HOURS
Machine was purchased for a specific project that got put on back burner
