Doosan DNM 200-5AX VMC 5-Axis 2017 with: Fanuc Oi-MD Control,
Renishaw Probing System,
Rigid Tap,
Spindle Chiller,
200 Block Look Ahead, and
LNS Chip Conveyor.
Renishaw Probing System,
Rigid Tap,
Spindle Chiller,
200 Block Look Ahead, and
LNS Chip Conveyor.
| X | 400.05 mm |
| Y | 435.1 mm |
| Z | 500.13 mm |
| # Axis | 5 |
| Power | 18.6 kW |
| RPM | 12,000 RPM |
| # ATC | 30 |
| Taper | CAT 40 Big Plus |
| Dimensions | 130″ x 97″ x 112″ |
| Weight | 12,125 lbs. |
| Control | CNC (Fanuc Oi-MD) |
EQUIPPED WITH
Fanuc Oi-MD CNC Control, Renishaw Probing System, 200 Block Look Ahead, Rigid Tapping, Spindle Chiller, and LNS Chip Conveyor. Hours: 3600 Power On, 1450 Run Time, and 1300 Cutting Time.
SPEC SHEET
Doosan DNM 200-5AX VMC 5-Axis 2017 with: Fanuc Oi-MD Control,
Renishaw Probing System,
Rigid Tap,
Spindle Chiller
Age: 2017Max. Workpiece Dia/Height 11.8″ / 7.9″
Max. Table Load 88 lbs.
Renishaw Probing System,
Rigid Tap,
Spindle Chiller
Age: 2017Max. Workpiece Dia/Height 11.8″ / 7.9″
Max. Table Load 88 lbs.
X-Axis 15.7″
Y-Axis 17.12″
Z-Axis 19.7″
A-Axis (Table Tilt) +30 Degrees to -120 Degrees
C-Axis (Table Index) .001 Degrees
Rapid Traverse Rates (X&Y / Z) 1417 IPM / 1181 IPM Spindle Nose-Table Top 1.2″ – 20.9″ Spindle Speed 12,000 RPM Motor 25 HP Spindle Torque 87 ft. lbs.
Taper CAT 40 Big Plus No. Tools 30 Max. Tool Diameter 3.1″ / 4.9″ Max. Tool Length 11.8″ Approx.
Dimensions 130″ x 97″ x 112″ Approx. Weight 12,125 lbs.
Equipped With: Fanuc Oi-MD CNC Control, Renishaw Probing System, 200 Block Look Ahead, Rigid Tapping, Spindle Chiller, and LNS Chip Conveyor. Hours: 3600 Power On, 1450 Run Time, and 1300 Cutting Time.
