DMG MORI NTX 2500 CNC Multi-Tasking Turning-Milling Center – Year 2020
Manufacturer:
DMG MORI
Model:
NTX 2500
Year of construction:
2020
Condition:
good (used)
Functionality:
fully functional
Operating hours:
12,500 h
Turning length:
1,530 mm
Turning diameter:
670 mm
Spindle bore:
91 mm
Travel distance Y-axis:
300 mm
Rotational speed (min.):
4,000 rpm
Equipment:
rotational speed infinitely variable
DMG NTX2500 / 1500mm 2nd Generation
Spindle
Standard Spindle 1 turnMASTER
FANUC specification.
Power output: 18.5 / 18.5 / 15 (25%ED / 50%ED / continuous) kW
Maximum spindle speed: 4,000 rpm
Maximum torque: 599 / 505 / 409 (25%ED / 50%ED / continuous) Nm
Spindle through-hole diameter: ø91 mm
Bar capacity: ø80 mm
Standard Spindle 2 turnMASTER
FANUC specification.
Power output: 18.5 / 18.5 / 15 (25%ED / 50%ED / continuous) kW
Maximum spindle speed: 4,000 rpm
Maximum torque: 599 / 505 / 409 (25%ED / 50%ED / continuous) Nm
Spindle through-hole diameter: ø91 mm
Bar capacity: ø80 mm
Control
Control F31iB5 with CELOS
CELOS – ERGOline Touch panel
Chuck for Main Spindle
KITAGAWA 12-inch Hollow Power Chuck B-212A821H
Chuck for Counter Spindle
(Spindle 2) KITAGAWA 10-inch Hollow Chuck BB210A821
Tool Spindle
Standard tool spindle, 12,000 rpm, 23/22.2 kW (FANUC)
Capto C6
Standard full indexing specifications
Maximum torque: 116/89 (40%ED/continuous) Nm
Tool Magazine
Tool storage capacity: 76 tools (Capto C6)
Coolant Supply
Knoll KF1100/700 compact filter system 7.0 MPa
Special Configuration
Through-tool spindle air blow (Lubricator added, spindle can rotate, switching between coolant and air)
Long tool stocker (3 tools, ø63mm×L600mm, C6, 8 kg each, above sub spindle/tailstock)
• Tool magazine capacity: 3 tools
• Max. tool diameter: ø63 mm
• Max. tool length: L600 mm
• Max. tool weight: 8 kg
• Max. tool moment: 7.84 Nm (from gauge line)
Automatic door
Highlights
– Simultaneous 5-axis machining with Direct Drive Motor (DDM) on the B-axis.
– The compactMASTER, the world’s shortest tool spindle in its class (350 mm), offers a large working envelope for higher productivity.
– Wide machining area with X-axis travel of 675 mm (-125 ~ +550 mm) and Y-axis travel of 300 mm (±150 mm)
– Y-axis travel of ±40 mm on Turret 2 extends machining range
– Minimal footprint of 16.5 m² (5,825 × 2,830 mm) in its class for workpieces up to ø670 × 1,530 mm
– 6-sided machining with Spindle 2 enables complete component machining in a single setup