| DMG MORI CMX 50U CNC 5-Axis Vertical Machining Center – Year 2020 | |
|---|---|
| Machine Type | CNC 5-Axis Vertical Machining Center |
| Year | 2020 |
| Control System | DMG MORI SLIMline Multi-Touch (Siemens 840D) |
| Power On Time | 7,112 Hours |
| Cutting Time | 5,209 Hours |
| Axis Travels | |
| X-Axis Travel | 498 mm (19.6″) |
| Y-Axis Travel | 450 mm (17.7″) |
| Z-Axis Travel | 400 mm (15.74″) |
| B-Axis (Table Swivel) | -5° to +110° |
| C-Axis Indexing | 0.001° |
| Table Specifications | |
| Table Size | 630 x 500 mm (24.8″ x 19.7″) |
| Table Load Capacity | 200 kg (440 lbs) |
| Spindle Specifications | |
| Spindle Speed | 15,000 RPM |
| Spindle Motor Power | 20 / 14.5 kW (27.2 / 19.4 HP) |
| Spindle Taper | CAT 40 Big Plus |
| Spindle Torque | 121 Nm (89.24 ft-lbs) |
| Tooling | |
| Tool Magazine Capacity | 60 Tools |
| Max Tool Diameter | 70 mm (2.76″) |
| Max Tool Weight | 8 kg (17.6 lbs) |
| Feed Rates | |
| Rapid Traverse Rate | 30 m/min (1,181 IPM) |
| Machine Dimensions & Weight | |
| Machine Dimensions (L x D x H) | 4,140 x 3,556 x 2,718 mm (163″ x 140″ x 107″) |
| Machine Weight | 5,443 kg (12,000 lbs) |
| Standard & Installed Features | |
| Display | 19″ Multi-Touch Color TFT |
| Machining Capability | Full 5-Axis Machining |
| USB Ports | (2) USB Ports |
| Trunnion | Integral Trunnion Rotary / Tilt Platter |
| Chip Conveyor | Left Side Exit |
| Touch Probe | Renishaw PP40 |
| Tool Presetter | Renishaw TS27R |
| 3D Quickset | Included |
| Through Spindle Coolant | 12 Bar |
| Bed & ATC Arm Flushing | M-Function Controlled |
| Coolant Spray Gun | For Swarf Removal |
| External Electronic Handwheel | Included |
| Cabin Roof | Included |
| Signal Lamp | Four-Color Signal Lamp |
| Memory | 16 MB |
| Graphic Simulation | Machining Process Simulation |
CNCBUL Industrial Machinery Solutions
Global Industrial Machine Solutions & Investment Advisory
Latest Guest Posts
Buying Guide
Available now : used DN Solutions ( DOOSAN ) Puma DNT 2600LM CNC Turning Center Chuck 10 inch C-Axis – Year 2024 made in South of Korea
Home › Blog › Buying Guide › Available now : used DN Solutions ( DOOSAN ) Puma DNT 2600LM CNC…
Read Guest Post →
Buying Guide
Available now : used Uniloy UIB 189-3 Injection Blow Mold Machine – Year 2016 made in Italy
Home › Blog › Buying Guide › Available now : used Uniloy UIB 189-3 Injection Blow Mold Machine – Year…
Read Guest Post →
Buying Guide
Available now : used GWEIKE LF3015GA CNC Fiber Laser 6kW – Year 2022 made in China
Home › Blog › Buying Guide › Available now : used GWEIKE LF3015GA CNC Fiber Laser 6kW – Year 2022…
Read Guest Post →