DMG MORI CLX 350 – Year 2017
CNC turning center with bar feeder IEMCA KID 80/16
Brand : DMG MORI
MODEL : CLX 350
Y.O.M.: 2017
Technical specifications of the DMG MORI CLX 350 CNC lathe
maximum turning diameter: 320 mm
maximum turning diameter (above slide): 400 mm
maximum turning diameter (over bed): 610 mm
recommended maximum turning diameter: 250 mm
turning length in Z axis: 530 mm
feed rate in the X/Z axis: 242.5/580 mm
rapid traverse in the X/Z axis: 30/36 m/min
maximum bar diameter: 51 mm
maximum spindle rotational speed: 5000 rpm
spindle passage: 73 mm
internal diameter of front spindle bearing: 120 mm
spindle main drive power (40% / 100% ED): 16.5/11 kW
spindle torque (40% / 100% ED): 168/112 Nm
lathe chuck: fi 210 mm
chuck diameter: 210/250 mm
swarf hopper capacity: 120 l
swarf conveyor capacity: 170 l
hydraulic unit capacity: approx. 10 l
maximum hydraulic unit pressure: 55 bar
compressed air pressure: 6 bar
air consumption: 15 m3/h
maximum power requirement: 28 kVA
power supply: 400 V; 50/60 Hz
lathe dimensions with swarf hopper (L x W x H): approx. 2800 x 1780 x 1850 mm
DMG MORI lathe dimensions with swarf conveyor (L x W x H): approx. 3680 x 1780 x 1850 mm
Equipment of the CNC turning centre CLX 350
CNC controller: Siemens Sinumerik 840d sl 4.7
bar feeder: IEMCA KID 80/16
tailstock type: hydraulic
number of VDI tools: 12
tailstock sleeve socket: MK 4
spindle tip: A2-6
tool socket acc. to DIN 69880 (VDI 3425)
The DMG MORI CLX 350 CNC turning center was built in 2017 by the Japanese company DMG Mori Seiki. The lathe has a spindle that can rotate at a maximum speed of 5000 rpm. The maximum turning diameter is 320 mm and the Z axis turning length is 530 mm. Additionally, the machine is offered as a set with bar feeder IEMCA KID 80/16 from 2017.
