DMG DECKEL MAHO DMF 260 CNC MultiTasking Machining Center – Year 2011
| Specification | DMF 260/7 |
|---|---|
| X / Y / Z Axis Travels | 2,600 / 700 / 700 mm (102.4″ / 27.6″ / 27.6″) |
| Rapid Traverse Rate | 40,000 mm/min (1,575 IPM) |
| Table Load Capacity | 40 kg (80 lbs) |
| Number of Axes | 4 (8) |
| Machine Dimensions | 2,900 × 700 mm (114.2″ × 27.6″) |
| Machine Weight | 2,150 kg (4,740 lbs) |
| Machine Height | 875 mm (34.4″) |
| Main Spindle Speed | 8,000 RPM |
| Main Spindle Power | 20 / 13.5 kW (26.8 / 18.1 HP) |
| Main Spindle Taper | SK40 |
| Optional High-Speed Spindle Speed | 15,000 RPM |
| Optional High-Speed Spindle Power | 21 / 16 kW (28.2 / 21.5 HP) |
| Optional High-Speed Spindle Taper | SK40 / HSK A63 |
| Optional Performance Spindle Speed | 20,000 RPM |
| Optional Performance Spindle Power | 35 / 25 kW (46.9 / 33.5 HP) |
| Optional Performance Spindle Taper | SK40 / HSK A63 |
| Tool Holder Type | SK40 / HSK A63 |
| B-Axis Swivel Range | 30° / 60° / 120° |
| Coolant Tank Capacity | 80 L (3.1 gal) |
| Hydraulic Tank Capacity | 130 L (5.1 gal) |
| Lubrication Tank Capacity | 300 L (11.8 gal) |
| Compressed Air Requirement | 6 bar (13.2 psi) |
| Total Connected Load | 7.6 kVA |
DMG DECKEL MAHO DMF 260 CNC MultiTasking Machining Center – Year 2011
| Specification | Details |
|---|---|
| Manufacturer | DMG |
| Model | DMF 260 |
| Year of Construction | 2011 |
| Machine Type | 5-Axis CNC Milling / MultiTasking Machining Center |
| Condition | Excellent used condition |
| Functionality | Fully functional |
| CE Marking | Yes |
| Operating Hours | 18,000 h |
| Spindle Operating Hours | 18,000 h |
| X-Axis Travel | 2,600 mm |
| Y-Axis Travel | 700 mm |
| Z-Axis Travel | 700 mm |
| Integrated NC Table Diameter | 700 mm |
| Overall Weight | 25,000 kg |
| Spindle Speed | 18,000 rpm |
| Spindle Speed Minimum | 18,000 rpm |
| Spindle Speed Maximum | 18,000 rpm |
| Spindle Motor Power | 46 W |
| Number of Spindles | 1 |
| Tool Holder | SK40 |
| Automatic Tool Changer / Tool Magazine Capacity | 30 positions |
| Maximum Tool Length | 300 mm |
| Maximum Tool Diameter | 130 mm |
| Maximum Tool Weight | 6,000 g |
| Input Voltage | 380 V |
| Input Current Type | Three-phase |
| Equipment | Chip conveyor, documentation/manual |
| Machine Status | Under power, ready for inspection |
The machine is in very good condition, under power, and ready for inspection.
