| Capacity |
X Axis Travel |
300 mm |
11.8 in |
300 mm |
11.8 in |
| Z Axis Travel |
165 mm |
7 in |
165 mm |
7 in |
| Bar Capacity |
27 mm |
1.062 in |
42 mm |
1.654 in |
| Working Holding |
Spindle Length with Hydraulic Cylinder & Chuck |
762 mm |
30 in |
787 mm |
31 in |
| Collet Type |
5C |
5C |
16C, B42 (DIN6343 173E) |
16C, B42 (DIN6343 173E) |
| 3-Jaw Chuck Size |
135 mm |
5.3 in |
152 mm |
6 in |
| Spindle Configuration |
A2-4 |
A2-4 |
A2-5 |
A2-5 |
| Precision |
Positional Repeatability |
0.00127 mm |
0.000050 in |
0.00127 mm |
0.000050 in |
| Positional Accuracy |
0.00127 mm |
0.000050 in |
0.00127 mm |
0.000050 in |
| Spindle Runout |
0.00127 mm |
0.000050 in |
0.00127 mm |
0.000050 in |
| Simultaneous Axes |
X-Z-C (3 Axes), X-C & Z-C Flat Plane Selection |
| CNC Control |
FANUC 0i-TF or FAGOR 8055iTB Conversational |
| Axis Control System |
FANUC AC Digital (Fiber optic linked drives) or FAGOR Sercos digital |
| Performance |
Spindle Motor Power (15 min) |
7.5 kW |
10 HP |
7.5 kW |
10 HP |
| Spindle Motor Power (continuous) |
5.5 kW |
7.3 HP |
5.5 kW |
7.3 HP |
| Spindle RPM |
60 – 6000 RPM |
| Axes Rapid Travel (X, Z) |
20 m/min |
787 ipm |
20 m/min |
787 ipm |
| Axis Maximum Feed Rate |
10.15 m/min |
400 ipm |
10.15 m/min |
400 ipm |
| Servo Motor Torque |
4.0 Nm cont. / 8.8 Nm max. |
35.4 in-lbs cont. / 77 in-lbs max. |
4.0 Nm cont. / 8.8 Nm max. |
35.4 in-lbs cont. / 77 in-lbs max. |
| Tooling |
Tooling Center Height |
42 mm |
1.653 in |
42 mm |
1.653 in |
| Miscellaneous |
Coolant Capacity |
95 liters |
25 gallons |
95 liters |
25 gallons |
| Coolant Pump Power |
186 W |
0.25 HP |
186 W |
0.25 HP |
| Chip Conveyor Type |
Reversible Direction, CNC Controllable (Optional) |
| Compressed Air Requirement |
Only required if air live tools or part catcher are requested |
| Total Power Required |
440VAC (220VAC on FANUC), 3 Phase, 12 KVA |
| Dimensions (L x D x H) |
1549 x 1220 x 1828 mm |
61 x 48 x 72 in |
1549 x 1220 x 1828 mm |
61 x 48 x 72 in |
| Weight |
1704 kg |
3750 lb |
1724 kg |
3800 lb |
