Chevalier FVL-1600VTC-C – Year 2022
CNC Vertical Lathe
Condition : New – Machine is in new condition and has never been installed.
Heavy Duty, Multi-Task Vertical Tuning Center With Live Tooling.
Chevalier FVL-1600VTC+C
| ITEM | Description | S.A.E. | Metric |
|---|---|---|---|
| Control | Fanuc 0i-T | – | – |
| Capacity | Max. swing diameter | 78.7” | 2,000 mm |
| Max. cutting diameter | 78.7” | 2,000 mm | |
| Max. turning height | 51.6” | 1,310 mm | |
| Max. torque | 19,030 Nm | – | |
| Max. table load | 22,000 lbs. | 10,000 kg | |
| Table | Table diameter | 63.0” | 1,600 mm |
| Speed range | High: 91 ~ 250 rpm / Low: 1 ~ 90 rpm | – | |
| Height from table to ground | 35.6” | 905 mm | |
| Machining spindle | Spindle speed | 25 ~ 2,500 rpm | – |
| Spindle taper | ISO 7/24 No.50 | – | |
| Distance from spindle nose to table surface | 60.2″ | 1,530 mm | |
| Travel | X-travel | -33.1” , +45.7” | -840 mm , +1,160 mm |
| Z-travel | 35.4” | 900 mm | |
| W-beam travel | 31.5” | 800 mm | |
| C Axis | Min. index angle | 0.001° | – |
| Rotation speed | 3.3 rpm | – | |
| Feed rates | X-, Z-axis rapid traverse | 393 ipm | 10 m/min |
| Cutting feed (C) | 0 ~ 1,200 deg./min | – | |
| W-axis beam rapid traverse | 28 ipm | 720 mm/min | |
| Automatic tool changer | Tool shank | BT50 | – |
| Pull stud | JMBTA standard 45° | – | |
| Tool changer system | Disk type | – | |
| Max. tool diameter | ø11” (full cutter state) | Ø280 mm (full cutter state) | |
| Max. tool length | 19.7” | 500 mm | |
| Tool change time (C-C) | 30 sec. | – | |
| Machine dimensions | Floor space (W x D x H) | 284.3” x 248.0” x 226.4” | 7,220 x 6,300 x 5,750 mm |
| Net weight | 70,500 lbs. | 32,000 kg |
TABLE DİA : 63″
SWİNG : 78.7″
WORK HT-U/R : 53″
POWER : 60 hp
RPM : 250 RPM
CONTROL : CNC (Fanuc OiTF)
Machine SPECIFICATIONS
Capacity:
Maximum Swing 78.7” (2,000 mm)
Maximum Turning Diameter 78.7” (2,000 mm)
Standard Maximum Turning Height Above Table 53” (1,350 mm)
Table:
Table Diameter 63” (1,600 mm)
Table Motor Fanuc α40; 60 HP
Table Speed (Auto 2 Speed Gearbox): Low Speed: 2-123 RPM / High Speed: 123-250 RPM
Maximum Table Torque 19,030 NM
Maximum Part Weight 22,000 lbs.
Live Tooling:
Live Tooling Motor Fanuc α15, 25 HP
Tooling Speed 25 – 2,500 RPM
Spindle Taper CAT 50
Transmission 2-speed gearbox
Maximum Torque 478 NM @375 rpm
C-Axis:
Minimum Index Angle 0.001 Degree
Cutting feed 0 ~ 1200 deg. /min
Table Rapid Speed 3.33 RPM
Auto Tool Change
Capacity 16 (7 turning stations, 1 protection cover)
Tool Holder CT 50
Pull Stud Type P50T-1
Maximum Tool Weight Turning Tool 110 LBS /Rotary Tool 55 LBS:
Axis Travels and Feed
Vertical Axis Counterbalance Hydraulic Counterbalance Device
X-axis Travel 78.6” (-33”/+45.6”)
Z-axis Travel 35.4”
W-axis Travel (Cross Rail) 31.4”
X-axis Rapid 393 IPM
Z-axis Rapid 393 IPM
W-axis Rapid 28 IPM
Cutting Feed Rate X, Z Axes 0.0004 – 118 IPM (Milling)
General Information:
Net Weight 70,400 lbs.
Machine Size (L x W X H) 272” (W) x 257” (D) x 253” (H)
Power 220V AC, 3 Phases, 100 KVA
Air 90 PSI, 200 L /min