BLM ADIGE SYS LASERTUBE LT14 CNC Tube & Profile Laser Cutting Machine – Year 2014
Technical specifications of BLM-ADIGE JUMBO LT14 3D laser cutting machine
laser power: 3.5 kW (3500 W)
number of axes: 5
CNC controller: SIEMENS
laser head longitudinal feed (X axis): 2000 mm
laser head vertical feed (Y axis): 700 mm
laser head piston feed (Z axis): 700 mm
laser head oscillation (B axis): -45°/-135°
laser head rotation (C axis): ±45°
maximum workpiece thickness: 16 mm
maximum workpiece diameter (circular cross-section): 355 mm
minimum workpiece diameter (circular cross-section): 30 mm
maximum workpiece diameter (square cross-section): 260×260 mm
minimum workpiece dimensions (square cross-section): 30×30 mm
maximum workpiece dimensions (rectangular cross-section): 300×200 mm
minimum workpiece dimensions (rectangular cross-section): 30×30 mm
maximum workpiece length: 12 m
minimum workpiece length: 3 m
maximum workpiece weight: 100 kg/m
line of travel: 1540 mm
3D cutting head
HMI operator panel: SIEMENS SIMATIC FLAT PANEL TOUCH
installed power: 70 kW
power supply: 3x 400 V; 50 Hz
weight of the BLM LASERTUBE LT14 machine: 10000 kg
BLM-ADIGE JUMBO LT14 tube laser cutting machine was built in 2014 in Italy by BLM S.p.A. The machine’s high versatility and extensive machining capabilities make it the perfect choice for precision machining of tubes, open profiles, I-beams and special profiles of large dimensions. It will significantly reduce the cost of producing a single component and improve the quality of cutting compared to other technologies available on the market.
The BLM-ADIGE LT JUMBO 14 3D tube laser cutting machine performs machining fully automatically, without the need for retooling or manual adjustments. Once the workpieces have been fed in, the loading unit with conveyor system segregates them according to cross-section, diameter and length. The workpiece is then moved towards the work area, where it is held by three special spindles that eliminate uncontrolled movements and guarantee more precise, faster cutting and shorter production times. At the same time, the 3D laser head moves along the workpiece, allowing all parts to be cut in front of, between and behind the spindles.
The offered BLM ADIGE SYS LASERTUBE LT14 tube and profile laser cutting machine has as standard an intuitive HMI operator panel with SIEMENS CNC control installed, where programming and data sharing are carried out in just a few steps. The total weight of the machine is 10000 kg.
