Bihler BZ-2/6 – Year 1988
Condition:used
Year:1988
Control:NC Control
Stroke:5- 400 SPM (Infinitely Variable)
Longitudinal feeds:+12 mm – 10 mm(Eccentric Control)
Feed length:120 mm; max. strip width 80 mm.
Gripper feed:ECCENTRIC CONTROLLED
Gripper feed max strip width:80MM
Nc gripper feed:750MM MAX FEED LENGTH
Nc gripper max. strip width:80MM
Nc radial gripper feed:RZV2 UNIT
Nc radial feed pitch:0 TO INFINITE
Nc radial gripper max. strip width:300MM
Cross feed units:12MM UPWARDS, 10MM DOWNWARDS
THREE-PHASE AC MOTOR WITH SEPARATE VENTILATOR AND TEMPERATURE PROBE; PROTECTIVE SWITCH FOR MOTOR AGAINST OVERLOAD
PRESS UNIT: TWO-POINT ECCENTRIC PRESS 300KN STROKE 12 MM
SLIDE UNITS – STANDARD SLIDES WITH POSITIVE DIRECT CONTROL BY DOUBLE FLAT CAMS
BELLCRANK LEVER UNIT
3RD BENDING PLANE – DRIVEN BY BEVEL GEARING FROM ANY OF THE LOWER ARRAY OF DRIVE POSITIONS;
SEPARATE DRIVE FOR EACH CENTRAL MANDREL = SLIDE UNIT
STRAIGHTENING UNITS
PROTECTIVE ENCLOSURE – FULL ENCLOSURE FOR PERSONNEL PROTECTION AND NOISE SUPPRESSION IN ACCORDANCE WITH EC MACHINE
GUIDELINES 89/392 EEC
SOUND ABSORPTION MAX. 20 DB (A)
2 RESISTANCE WELDING STATIONS
ROMAN TRANSFORMERS
TRUAMP WELDING CONTROLS BY ATEK
CHILLER
MANUALS
PRESS UNIT: TWO-POINT ECCENTRIC PRESS 300KN STROKE 12 MM
SLIDE UNITS – STANDARD SLIDES WITH POSITIVE DIRECT CONTROL BY DOUBLE FLAT CAMS
BELLCRANK LEVER UNIT
3RD BENDING PLANE – DRIVEN BY BEVEL GEARING FROM ANY OF THE LOWER ARRAY OF DRIVE POSITIONS;
SEPARATE DRIVE FOR EACH CENTRAL MANDREL = SLIDE UNIT
STRAIGHTENING UNITS
PROTECTIVE ENCLOSURE – FULL ENCLOSURE FOR PERSONNEL PROTECTION AND NOISE SUPPRESSION IN ACCORDANCE WITH EC MACHINE
GUIDELINES 89/392 EEC
SOUND ABSORPTION MAX. 20 DB (A)
2 RESISTANCE WELDING STATIONS
ROMAN TRANSFORMERS
TRUAMP WELDING CONTROLS BY ATEK
CHILLER
MANUALS
