HWACHEON Hi-M1300 CNC Machine Specifications
Origin: South Korea
Category: Engraving Machine CNC
| Item | Hi-M1300 20K | Hi-M1300 30K |
|---|---|---|
| Travel | ||
| X-axis Stroke (mm) | 1,300 | 1,300 |
| Y-axis Stroke (mm) | 800 | 800 |
| Z-axis Stroke (mm) | 400 | 400 |
| Distance: Table Surface to Spindle Nose (mm) | 50 ~ 450 | 50 ~ 450 |
| Table | ||
| Table Size (mm) | 1,300 × 800 | 1,300 × 800 |
| Max Loading Capacity (kgf) | 300 | 300 |
| T-Slot (W × P / No.) | 16 × 125 / 5ea | 16 × 125 / 5ea |
| Spindle | ||
| Max Spindle Speed (rpm) | 24,000 | 30,000 |
| Spindle Motor (kW) | 6 (Opt.: 12.5) | 6 (Opt.: 12.5) |
| Spindle Taper | BT-30 | BT-30 |
| Spindle Bearing ID (mm) | - | - |
| Spindle Type | Built-in | Built-in |
| Lubrication | Grease | Grease |
| Cooling Method | Coolant Cooling (Water Chiller) | Coolant Cooling (Water Chiller) |
| Feedrate | ||
| Rapid Traverse (X/Y/Z) (m/min) | 25 / 25 / 20 | 25 / 25 / 20 |
| Cutting Feedrate (X/Y/Z) (mm/min) | 1 ~ 10,000 | 1 ~ 10,000 |
| Motor | ||
| Feed Axis (X/Y/Z) (kW) | 1.86 / 1.86 / 1.86 [FANUC: 3 / 3 / 3] | 1.86 / 1.86 / 1.86 [FANUC: 3 / 3 / 3] |
| Coolant Motor (kW) | - | - |
| Spindle Cooler (kW) | 0.4 | 0.4 |
| ATC | ||
| Tool Shank | BT-30 | BT-30 |
| Pull Stud | MAS P40T-1 (45°) | MAS P40T-1 (45°) |
| Tool Storage (ea) | 16 | 16 |
| Max Tool Diameter (mm) | Ø16 | Ø16 |
| Max Tool Length (mm) | 200 | 200 |
| Max Tool Weight (kgf) | 3 | 3 |
| Tool Selection | Fixed Address | Fixed Address |
| Power Source | ||
| Electric Power Supply (kVA) | 25 | 25 |
| Power Specification | 380V, 60Hz [FANUC: 220V, 60Hz] | 380V, 60Hz [FANUC: 220V, 60Hz] |
| Compressed Air (Pressure × Consumption) | 0.5 ~ 0.7MPa × 690 Nℓ/min | 0.5 ~ 0.7MPa × 690 Nℓ/min |
| Tank Capacity | ||
| Spindle Coolant (ℓ) | - | - |
| Lubrication (ℓ) | 2 | 2 |
| Coolant (ℓ) | - | - |
| Machine Size | ||
| Height (mm) | 2,360 ~ 2,760 | 2,360 ~ 2,760 |
| Floor Space (L × W) (mm) | 2,462 × 2,755 [Full Cover: 2,690 × 2,670] | 2,462 × 2,755 [Full Cover: 2,690 × 2,670] |
| Weight (kgf) | 5,000 | 5,000 |
| NC Controller | ||
| NC System | SIEMENS-828D (Opt.: FANUC 0i-MF) | SIEMENS-828D (Opt.: FANUC 0i-MF) |
