Item	S300Xd2 S300Xd2 RD *9 S300Xd2-5AX S300Xd2-5AX RD *9	S500Xd2 S500Xd2 RD *9 S500Xd2-5AX S500Xd2-5AX RD *9	S700Xd2 S700Xd2 RD *9 S700Xd2-5AX S700Xd2-5AX RD *9	S700Xd2-100T S700Xd2-100T RD *9 S700Xd2-5AX/100T S700Xd2-5AX/100T RD *9
CNC Unit	[S300Xd2/S500Xd2/S700Xd2] CNC-D00 [S300Xd2-5AX/S500Xd2-5AX/S700Xd2-5AX] CNC-D00v(DB)
X axis travel [mm (inch)]	300 (11.8)	500 (19.7)	700 (27.6)	700 (27.6)
Y axis travel [mm (inch)]	450 (17.7)
Z axis travel [mm (inch)]	300 (11.8)	300 (11.8)	380 (15.0)	380 (15.0)
Distance between table top and spindle nose [mm (inch)]	180–480 (7.1–18.9)	180–480 (7.1–18.9)	150–530 (5.9–20.9)	150–530 (5.9–20.9)
Table size [mm (inch)]	600×450 (23.4×17.7)	800×450 (31.4×17.7)	800×450 (31.4×17.7)	800×450 (31.4×17.7)
Max. loading capacity (uniform load)	250 kg [300 *6] (551 lbs [661 *6])	250 kg [400 *6] (551 lbs [881 *6])	250 kg [400 *6]	250 kg [400 *6]
Spindle speed [min⁻¹]	12 000 rpm std; Optional: 16 000 rpm / 10 000 rpm high-torque / 27 000 rpm (not for 380 mm Z models)
Speed during tapping [min⁻¹]	Max 6 000 (8 000 for 27 000 rpm spec.)
Tapered hole	7/24 Taper No.30 BT dual-contact (BIG-PLUS)
Coolant Through Spindle (CTS)	Optional (not available for 27 000 rpm models)
Rapid traverse rate [m/min]	50 × 50 × 56 (1 969 × 1 969 × 2 205)
Cutting feed rate [mm/min]	X,Y,Z = 1–30 000 (0.04–1 181) *7
Tool shank type	MAS-BT30
Tool storage capacity [pcs]	14 / 21	14 / 21 / 28	100 *12
Max. tool length [mm]	160 [21 tool] / 250 [14 tool]	250	250	250
Max. tool diameter [mm]	110 (4.3)	Turret 110 / Tool stocker 60 / 110 (no adjacent tool)
Max. tool weight [kg]	3.0 (6.6) [4.0 (8.8)*10] / tool – Total weight 35 (77.2)
Tool selection method	Random shortcut method
Tool change time [sec]	Tool-to-Tool 0.6 / 0.7 (14–28 tools) Chip-to-Chip 1.2–1.3	Tool-to-Tool 0.7 *13 / Chip-to-Chip 1.4 *13
Main spindle motor (10 min/cont.) [kW]	12 000 rpm = 10.1/7.0 16 000 rpm = 7.4/5.1 10 000 rpm high-torque = 12.8/9.2 27 000 rpm = 8.9/6.3		Same as left (12 000 rpm = 10.1/7.0 etc.)
Axis feed motor [kW]	X,Y = 1.0 / Z = 2.0
Power supply	AC 200–230 V ±10%, 3-phase 50/60 Hz ±2%
Power capacity [kVA]	9.5 (12 000 / 16 000 / 27 000 rpm); 10.4 (for 10 000 rpm high-torque)
Air pressure [MPa]	0.4–0.6 (recommended 0.5 MPa *8)
Air flow [L/min]	40 (27 000 rpm spec: 115)
Machine height [mm]	2 529 (99.6) / 2 568 (101.1)	2 568 (101.1)
Floor space [mm]	1 080 × 2 161 (42.5 × 85.1)	1 560 × 2 081 (61.4 × 81.9)	2 050 × 2 081 (80.7 × 81.9)
Machine weight [kg]	2 350 [2 650]	2 400 [2 700]	2 550	2 700
Accuracy of positioning [mm]	0.006–0.020 (0.00024–0.00079)
Repeatability [mm]	< 0.004 (0.00016)
Front door	2 doors
Standard accessories	Instruction manual (DVD), leveling bolts (4), leveling plates (4)

*1 Actual tool weight differs depending on the configuration and center of gravity. The figures shown here are for reference only.
*2 Spindle motor output differs depending on the spindle speed.
*3 Measured in compliance with ISO standards and Brother standards. Please contact your local distributor for details.
*4 Brother specifications apply to the pull studs for CTS.
*5 Measured in compliance with JIS B6336-9 and MAS011-1987.
*6 Parameter adjustment is required. (Acceleration adjustment and positioning speed are also changed according to the weight.)
*7 When using high accuracy mode B.
*8 Regular air pressure varies depending on the machine specifications, machining program details, or use of peripheral equipment. Set the pressure higher than the recommend value.
*9 The machine needs to be equipped with a relocation detection device depending on the destination. Machines equipped with a relocation detection device come with “RD” at the end of the model name.
*10 Parameter setting must be changed. (Tool indexing time will change.) Max. tool weight 4.0 kg cannot be available for the 27,000 min-1 specifications.
*11 The value does not include the coolant tank.
*12 Value for turret magazine plus tool stocker
*13 Value for turret magazine