CNCBUL Industrial Machinery Brokerage
Global Industrial Machine Brokerage & Investment Advisory
WAIDA APX-105 CNC Machine Specifications
Origin: Japan
Category: Insert Grinder CNC 5-Axis Carbide Cermet Ceramic CBN PCD
| APX-105 – STANDARD SPECIFICATIONS | ||
|---|---|---|
| Workpiece | ||
| Objects of grinding | Periphery and both side K-land of standard insert (Standard and small diameter) Minimum inscribed circle: Equilateral triangle 3.5 mm / Others: 4.7 mm | |
| Material | Carbide, Cermet, Ceramics, CBN, PCD | |
| Maximum circumscribed circle | 45 mm | |
| Maximum thickness | 15 mm | |
| X axis (In-feed) | ||
| Maximum rapid feed rate | 10 m/min | |
| Y axis (Oscillation) | ||
| Maximum rapid feed rate | 30 m/min | |
| B axis (Insert rotation) | ||
| Travel | ∞ | |
| Maximum rapid feed rate | 100 min⁻¹ | |
| C axis (Swiveling table) | ||
| Grinding range | -90° ~ +95° deg. (Some limitations depending on the conditions.) | |
| Maximum rapid feed rate | 9,000°/min | |
| Spindle | ||
| Grinding wheel size | Outside diameter Ø350 mm | |
| Spindle rotation speed | 500 ~ 2,000 min⁻¹ | |
| Motor | 7.5 kW | |
| Tail stock | ||
| Maximum chuck pressure | 10 kN (Theoretical value at supplied pressure 7 MPa) | |
| Dressing device | ||
| Diameter of dressing wheel | Outside diameter Ø100 mm | |
| Wheel rotation speed | 300 ~ 1,500 min⁻¹ | |
| Centering pin device | ||
| Operating system | Exchanging system | |
| Automatic centering device | ||
| Control system | Back/forward, up/down automatic control system | |
| Measuring device | ||
| Measuring probe | Flat type carbide probe Ø7 | |
| Loading unloading device | ||
| Robot | SCARA robot | |
| Robot hand | Loading hand, unloading hand each 1 set, insert pusher | |
| Work stock | ||
| Pallet type / No. of pallet (vertical) | Standard pallet (240 mm × 300 mm): 3 pallets T-type pallet (190 mm × 370 mm): 4 pallets | |
| Touch panel | ||
| Panel | 5.7 inch handy type | |
| Oil cooling unit | ||
| Cooling part | Y axis linear motor and grinding wheel spindle | |
| OPTION | ||
| Thickness measuring device | Included | |
| AE Sensor | Included | |
| In-process cleaning device | Cleaning wheel size: Outside diameter Ø150 mm Wheel rotation speed: 300 ~ 1,500 min⁻¹ | |
| Washing device | Included | |
| Mist collector | Included | |
| Workpiece for lay down pallet specification | Magnetic specification | |
| Camera for lay down pallet | For lay down pallet – Work position / phase | |
| Pallet changer | 10 pallets | |
| Splash gun / Air gun | Included | |
| Grinding fluid supply device | Tank capacity: 300 L | |
| Oil grinding specification | Automatic fire extinguisher Fire damper Packing for oil grinding Coolant temperature controller Oil flow sensor | |
| Measuring device (for large diameter workpiece) | Included | |
| Air blow for measuring | Included | |
| NC STANDARD SPECIFICATION | ||
| NC Unit | FANUC Series 31i-MODEL B | |
| Control axis | X axis (In-feed) Y axis (Oscillation) B axis (Insert rotation) C axis (Swiveling table) | |
| Maximum Simultaneous control axis | 4 axes | |
| DRIVE SOURCE | ||
| Total electric capacity | 12 kVA AC200 V (50/60 Hz) | |
| Compressed air pressure | 0.35 MPa or more | |
| Air consumption | 450 NL/min | |
| Hydraulic unit maximum pressure | 7 MPa | |
| MACHINE SIZE | ||
| W × D × H | 2,945 × 2,055 × 2,375 mm | |
| Machine weight | 6,000 kg | |
| JIGS OPTION | ||
| Grinding wheel | Included | |
| Dressing wheel | Included | |
| In-process cleaning wheel | Included | |
| Driving arbor | Included | |
| Clamping arbor | Included | |
| Centering block | Included | |
| Robot finger | Included | |
| Centering pin | Included | |
| Work guide | Included | |
| Pallet | Included | |
| Caution | ||
| * This product may be regulated by the Foreign Exchange and Foreign Trade Control Law. Be sure to consult us before exporting the product to a foreign country. * Specifications in this catalog may be changed without notice due to improvement of the product. | ||
