YCM FP100A CNC Vertical Machining Center – Year 2014
Technical specifications of the YCM FP100A CNC milling machine
feed in the X/Y/Z axis: 1020/710/460 mm
rapid traverse in the X,Y,Z axis: 20 m/min
working feed rate: 1-20000 mm/min
work table dimensions (L x W): 1200 x 700 mm
maximum workpiece weight: 1000 kg
maximum spindle rotational speed: 16000 rpm
spindle taper: HSK A63
spindle drive power: 22.5 kW
spindle torque: 126 Nm
maximum tool diameter: 76 mm
maximum tool diameter (with adjacent spaces free): 100 mm
maximum tool length: 250 mm
maximum tool weight: 6 kg
tool change mechanism: feeder arm
positioning accuracy (ISO 10791-4): 0.007 mm
positioning repeatability (ISO 10791-4): 0.005 mm
positioning accuracy (JIS B 6338): 0.002/300 mm
positioning repeatability (JIS B 6338): ± 0.002 mm
minimum distance between work table and spindle tip: 150 mm
maximum distance between work table and spindle tip: 610 mm
number of T-slots: 6
T-slot width: 18 mm
T-slot spacing: 100 mm
compressed air requirement: 5.5 bar
installed power: 65 kVA
dimensions (L x W x H): 3203 x 3235 x 3325 mm
weight of machine: 10500 kg
Equipment of the FP100A milling center
CNC controller: HEIDENHAIN iTNC 530
30-position magazine with automatic tool changer
workpiece touch probe: HEIDENHAIN TS640
HEIDENHAIN optical scales in the X,Y,Z axes
IKO roller guides in all linear axes
spindle cooling system
spindle cone blow-off
chain chip conveyor
chip container
central lubrication system
oil separator
levelling block set
compressed air gun
workspace illumination
control cabinet cooling
operating manual
YCM FP100A CNC machining center was built in 2014 in Taiwan. Equipped with state-of-the-art technology and components from renowned brands, the machine is used for precision 3D machining of heavy workpieces weighing up to 1000 kg. During machining, the reliable spindle built in IDD (Isolated Direct Drive) technology moves on roller guides from Japanese company IKO, which minimises the effects of bending torque and also ensures high positioning accuracy. In addition, the use of precision ceramic bearings guarantees quiet operation and long life of the spindle.
The FP100 A milling center is offered with a comprehensive range of equipment, including a 30-position magazine with automatic tool changing and an intuitive CNC control by HEIDENHAIN. The controller’s excellent optimisation and multitude of functions significantly simplify operation and enable advanced machining programmes to be created in just a few steps. The YCM CNC vertical machining center weighs 10500 kg.
