Weco S206E-II CNC Swiss Lathe with IEMCA Smart 320 Bar Feeder – Year 2021
| Specification | WECO S206E-II |
|---|---|
| Number of Controlled Axes | 8 (X1, Y1, Z1, C1, X2, Y2, Z2, C2) |
| Max. Machined Bar Diameter (Main Spindle) | Ø20 mm |
| Max. Chuck Diameter (Sub Spindle) | Ø20 mm |
| Max. Turning Length (with Rotating Guide Bushing) | 210 / 45 mm |
| Max. Deep Hole Drilling Diameter | Ø8 mm |
| Max. Front Drilling / Tapping Capacity | Ø10 mm / M8 |
| Max. Rear Drilling / Tapping Capacity | Ø8 mm / M6 |
| Max. Drilling / Tapping Capacity (Left + Right Driven Tool Posts) | L: Ø6 mm / M5 P: Ø8 mm / M6 |
| Max. Drilling / Tapping Capacity (Rear Driven Tool Post) | Ø6 mm / M5 |
| Max. Diameter of Radial Saw on Right Driven Tool Post | Ø30 mm |
| Spindle Speed | 12 000 rpm |
| Driven Tools (Left + Right + Rear Posts) | 8 000 rpm |
| Built-in Rotary Guide Bushing | 12 000 rpm |
| Spindle Motor Power | 2.2 / 3.7 kW (Main), 1.5 / 2.2 kW (Sub) |
| Axis Travel (X1 / Y1 / Z1 / X2 / Y2 / Z2) | 124 / 280 / 290 / 340 / 60 / 300 mm |
| Tooling System | — |
| Turning Tools (Left + Right Posts) | 5 + 3 |
| Drilling Tools (Right Post / Front or Rear) | 5 (max 10) |
| Radial Driven Tools (Left + Right Posts) | 3 + 2 |
| Axial Driven Tools (Fixed + Driven) | 4 + 4 |
| Deep Hole Drilling Tools | 2 |
Manufacturer:
WECO
Model:
S206E-II
Year of construction:
2021
Condition:
used
Operating hours:
7,600 h
Turning length:
210 mm
Spindle speed (max.):
12,000 rpm
Overall weight:
3,700 kg
Total width:
1,400 mm
Total length:
2,300 mm
Total height:
2,000 mm
Bar diameter (max.):
20 mm
Equipment:
documentation/manual
Technical details:
– Used WECO S206E-II
– Operating hours: 7,600
– Control: Fanuc
– Bar capacity: Ø 3 mm up to max. Ø 20 mm
– Maximum machining length: 210 mm
– Main spindle / sub-spindle drive power: 3.7 kW / 2.2 kW
– Spindle speed: 12,000 rpm
Further details can be found in the PDF data sheet.
The machine is sold with the following equipment:
– IEMCA Smart 320 bar feeder
– Chip conveyor
– Fire extinguishing system Kraft & Bauer
– Thread whirling unit
The machine is in very good condition and can be inspected under power by appointment.
