| WALTER Helitronic Mini Power-F TYP/VERSION FS CNC 5-Axis Tool & Cutter Grinding Machine – Year 2010 | ||
|---|---|---|
| Specification | Imperial | Metric |
| GENERAL INFORMATION | ||
| Manufacturer | WALTER | |
| Model | Helitronic Mini Power-F | |
| Type / Version | FS | |
| Machine Type | CNC 5-Axis Tool & Cutter Grinding Machine | |
| Year of Manufacture | 2010 | |
| Serial Number | 661110 | |
| Condition | Used | |
| Country of Manufacture | Germany | |
| Number of CNC Axes | 5 Axes | |
| CNC Control | Fanuc Panel i | |
| TOOL GRINDING CAPACITY | ||
| Maximum Tool Diameter | 4″ | Approx. 102 mm |
| Maximum Grinding Length | 7.9″ | Approx. 201 mm |
| LINEAR AXES | ||
| X-Axis Travel – Longitudinal | 13.8″ | Approx. 351 mm |
| Y-Axis Travel – Vertical | 7.9″ | Approx. 201 mm |
| Z-Axis Travel – Cross | 18.5″ | Approx. 470 mm |
| Linear Axis Rapid Traverse | 600 IPM | Approx. 15,240 mm/min |
| ROTARY AXES | ||
| C-Axis Travel – Rotary | +200° | |
| C-Axis Rapid Traverse | 12°/sec | |
| Workhead / A-Axis Speed | 50 RPM | |
| GRINDING SPINDLE | ||
| Grinding Spindle Type | Double-End Grinding Spindle | |
| Double-End Grinding Spindle Size | 2.8″ | Approx. 71 mm |
| Grinding Wheel Capacity | Up to 6 Grinding Wheels | |
| Maximum Grinding Wheel Diameter | 6″ | Approx. 152 mm |
| Grinding Spindle Speed Range | 0 – 9,500 RPM | |
| Grinding Spindle Power | 10 HP | Approx. 7.5 kW |
| CNC CONTROL & SOFTWARE | ||
| CNC Control System | Fanuc Panel i | |
| Grinding Software | WALTER Helitronic Tool Studio | |
| End Mill Grinding | Supported | |
| Spherical Cutter Grinding | Supported | |
| Drill Grinding | Supported | |
| Reamer Grinding | Supported | |
| PROBING & MEASURING SYSTEM | ||
| Probing System | Heli Probe Measuring & Positioning System | |
| Automatic Tool-End Measurement | Included | |
| Automatic Flute Number Measurement | Included | |
| Automatic Helix Angle / Lead Measurement | Included | |
| Automatic Outside Diameter Measurement | Included | |
| Probing Capability | Exact capabilities vary according to the specific program and application | |
| AUTOMATION | ||
| Part Loader | Included | |
| Loader Trays | Not Included | |
| COOLANT SYSTEM | ||
| Integral Coolant Enclosure | Included | |
| Programmable Coolant Valves | 3 per Grinding Spindle End / 6 Total | |
| Coolant Tank | Not Included | |
| Coolant Pump | Not Included | |
| MACHINE FEATURES & EQUIPMENT | ||
| Fluorescent Work Light | Included | |
| Operator Access Door | Included | |
| Service Access Door | Included | |
| Machine Drip Pan | Included | |
| Fire Suppression System | Included | |
| Isolation Transformer | Included | |
| ELECTRICAL DATA | ||
| Electrical Supply | 400 V / 3 Phase / 60 Hz | |
| Total Power Requirement | 25 kVA | |
| Control Voltage | 24 VDC | |
| COMPRESSED AIR REQUIREMENTS | ||
| Minimum Air Pressure | 80 PSI | Approx. 5.5 bar |
| Air Consumption | 2 SCFM | Approx. 57 L/min |
| Compressed Air Quality | Clean & Dry Air Required | |
| MACHINE DIMENSIONS | ||
| Machine Dimensions – Front/Back × Left/Right × Height | 75″ × 105″ × 91″ | Approx. 1,905 × 2,667 × 2,311 mm |
| Drip Pan Dimensions – Front/Back × Left/Right | 54″ × 105″ | Approx. 1,372 × 2,667 mm |
| INCLUDED EQUIPMENT SUMMARY | ||
| Fanuc Panel i CNC Control | Included | |
| WALTER Helitronic Tool Studio Software | Included | |
| Heli Probe Measuring & Positioning System | Included | |
| Double-End Grinding Spindle | Included | |
| Part Loader | Included – No Trays | |
| Fire Suppression System | Included | |
| Isolation Transformer | Included | |
| Coolant Enclosure | Included | |
| Coolant Tank & Pump | Not Included | |
