Uniloy UIB 189-3 Injection Blow Molding Machine – Technical Specifications
Note: The UIB 189-3 is a legacy 3-station injection blow molding machine. Specifications are compiled from official Uniloy references and promotional materials. For machine-specific details (serial number based), contact Uniloy directly.
| Parameter | Specification |
|---|---|
| Machine Type | 3-Station Injection Blow Molding (Horizontal Rotary Table) |
| Clamp Force (Injection) | ≈ 189 metric tons (≈ 208 US tons) |
| Stations | Injection → Conditioning / Blow → Eject |
| Extruder | Horizontal Reciprocating Screw (Example: 3 in / 76 mm Diameter × 25:1 L/D) |
| Plasticizing Rate | 75 – 100+ g/sec (Depending on Screw & Resin) |
| Container Size Range | 2 ml to Approximately 2 Liters (Model Dependent) |
| Blow System | Two-Pressure Blow (Standard Low: 150 psi, Optional Higher) |
| Control System | Microprocessor / BNR Type with Parameter Storage |
| Key Features | Scrap-Free Process, Precise Neck Finish, Tie-Bar Clamp, Ground-Level Extruder, Hydraulic Components Below Molding Area |
| Parameter | Details |
|---|---|
| Container Example | 12 oz (355 ml) Round HDPE Bottles |
| Neck Finish | 33 mm |
| Resin | HDPE (Compatible with a Wide Range of Thermoplastics) |
Source: Official Uniloy technical literature and promotional materials. Specifications may vary depending on machine configuration, installed options, and year of manufacture.
