Takumi U600 CNC 5-Axis Vertical Machining Center – Year 2018
| General Information | |
| Machine Type | CNC 5-Axis Vertical Machining Center |
| Control | Heidenhain TNC 7 |
| Certification | CE Certified |
| Travel | |
| X-Axis | 660 mm (24.40 in) |
| Y-Axis | 1020 mm (39.40 in) |
| Z-Axis | 500 mm (19.70 in) |
| C-Axis Rotation | 360° |
| A-Axis Rotation | +30° / -110° |
| Spindle Nose to Table | 90 – 590 mm (3.50 – 23.20 in) |
| Table | |
| Table Diameter | 600 mm (23.60 in) |
| Max Table Load | 500 kg (1100 lbs) |
| T-Slots | 6 x 14 mm (60°) |
| Spindle | |
| Spindle Type | In-Line Big Plus® |
| Max Speed | 15,000 RPM |
| Spindle Power | 12.5 kW (16.8 HP) |
| Spindle Torque | 89.4 Nm (65.9 ft-lbs) |
| Spindle Taper | BT / CAT 40 |
| Through Spindle Coolant | 30 bar (435 psi) |
| Feed Rates | |
| Rapid Traverse (X/Y/Z) | 36 m/min (1417 ipm) |
| Cutting Feed Rate | 20 m/min (787 ipm) |
| C-Axis Speed | 33 RPM |
| A-Axis Speed | 25 RPM |
| ATC (Automatic Tool Changer) | |
| ATC Type | Rotating Magazine / Swing Arm |
| Magazine Capacity | 50 Tools |
| Max Tool Diameter | 75 mm (2.95 in) / 150 mm (5.90 in with adjacent pocket empty) |
| Max Tool Length | 300 mm (11.80 in) |
| Max Tool Weight | 8 kg (17.60 lbs) |
| Machine Requirements | |
| Pneumatic Pressure | 6 kgf/cm² (85 psi) |
| Power Consumption | 60 kVA |
| Machine Weight | 14,000 kg (30,864 lbs) |
| Dimensions (L x W x H) | 3440 x 4500 x 3400 mm (135.43 x 177.16 x 133.85 in approx.) |
| Equipped With | |
| Heidenhain TNC 7 Controller Dynamic Collision Monitoring 5-Axis Center Dynamic Offset 15,000 RPM Big Plus® In-Line Spindle Coolant Through Spindle (435 psi) Cutting Air Blast Spindle Oil Cooler Oil Skimmer Linear Axis Scales (X / Y / Z) 3 Axis Absolute Encoder Motors 40 Station ATC Chain Type Chip Conveyor Twin Enclosure Augers Heidenhain TS 460 Automatic Workpiece Measurement System Blum Automatic Tool Length Measurement System Wash Down System 3 Color Signal Light Working Light Manual Pulse Generator (MPG) Electrical Cabinet Air Conditioner Air & Coolant Wash Guns Tool Kits Leveling Bolts & Pads Operation Manuals |
|
| Manufacturer | Takumi |
| Model | U600 |
| Year | 2018 |
| Machine Type | CNC 5-Axis Vertical Machining Center |
| Control | |
| Control Type | Heidenhain® TNC 7 |
| Travel | |
| X-Axis Travel | 660 mm (25.98 in) |
| Y-Axis Travel | 1020 mm (40.16 in) |
| Z-Axis Travel | 500 mm (19.69 in) |
| Spindle Nose to Table Distance | 160 – 660 mm (6.30 – 25.98 in) |
| Table | |
| Table Diameter | 600 mm (23.62 in) |
| Max Table Load | 500 kg (1102 lbs) |
| T-Slot Size | 14 x 100 x 5 mm (0.55 x 3.94 x 0.20 in) |
| Spindle | |
| Spindle Speed | 15,000 RPM |
| Spindle Power | 14 kW (18.8 HP) |
| Spindle Taper | Big Plus® CAT 40 |
| Peak Spindle Torque | 89.4 Nm (65.9 ft-lb) |
| Through-Spindle Coolant | 30 bar (435 psi) |
| Feed Rates | |
| Rapid Traverse (X/Y/Z) | 36 / 36 / 36 m/min (1417 / 1417 / 1417 ipm) |
| Cutting Feed Rate | 20 m/min (787 ipm) |
| Automatic Tool Changer (ATC) | |
| ATC Type | Swing Arm |
| Magazine Capacity | 30 or 50 Tools |
| Max Tool Diameter | 75 mm (2.95 in) / 150 mm (5.91 in) (adjacent pocket empty) |
| Max Tool Length | 300 mm (11.81 in) |
| Max Tool Weight | 8 kg (17.64 lbs) |
| Tool Shank | CAT 40 (BT 40 Optional) |
| Machine Specifications | |
| Machine Weight | 14,000 kg (30,864.72 lbs) |
| Power Requirement | 60 KVA |
| Pneumatic Pressure | 6 kgf/cm² (85.34 psi) |
| Dimensions | |
| Machine Dimensions (L x W x H) | 3255 x 3855 x 3520 mm (128.15 x 151.77 x 138.58 in) |
