SUPERTEC G38P-60CNC CNC Cylindrical Grinder Plunge Type – Year 2018
| Description/Model | SUPERTEC G32P / G38P / G45P – 50 / 60 / 75 / 100 / 150 / 200CNC | ||||||
|---|---|---|---|---|---|---|---|
| General Capacity | Swing over Table (mm) | Ø320 (Ø12.6″) / Ø380 (Ø15″) / Ø450 (Ø18″) | |||||
| Distance between Centers (mm) | 500 (20″) | 600 (24″) | 750 (30″) | 1000 (40″) | 1500 (60″) | 2000 (80″) | |
| Max. Grinding Diameter (mm) | Ø300 (Ø12″) / Ø360 (Ø14″) / Ø430 (Ø17″) | ||||||
| Max. Load Held between Cenetrs (kg) | 150 (330lbs) | ||||||
| Grinding Wheel | Diameter x Width x Bore (mm) | Ø510 × 50~100 × Ø152.4 (Ø20″ × 2″~4″ × Ø6″) | |||||
| Wheel Speed (rpm) | 1390 | ||||||
| Max.peripheral speed (M/min) | 2000~3600 | ||||||
| Wheelhead ( X Axis ) |
Rapid Feeding Speed (M/ min) | 6 | |||||
| Infeed Travel (mm) | 225 (9″) | ||||||
| Min. Increment Infeed (mm) | Ø0.001 (Ø0.0001″) | ||||||
| Spindle Type | Bearing Type | ||||||
| Workhead | Spindle Speed (Variable)(rpm) | Max.350 | |||||
| Center Taper (MT) | MT 4(Opt. MT 5) | ||||||
| Spindle Type | Fixed & Rotary | ||||||
| Diameter of Bore (mm) | Ø23 (0.9″) | ||||||
| Tailstock | Quill Travel (mm) | 25(1″) | |||||
| Center Taper (MT) | MT 4(Opt. MT 5) | ||||||
| Table ( Z Axis ) |
Rapid Feeding Rate (M/ min) | 8 | |||||
| Min. Increment Infeed (mm) | 0.001 (0.0001″) | ||||||
| Swivelling Angle C.C.W | 9° | 7° | 5° | 3° | |||
| Motor | Wheel Spindle Motor (kW) | 5 | |||||
| Workhead Motor (kW) | 1.5 | ||||||
| Lubrication Pump | 5.2 L/min 10kg/cm2 | ||||||
| Hydraulic Pump | 20 L/min 55kg/cm2 | ||||||
| Coolant Pump | 80 L/min 0.7kg/cm2 | ||||||
| Wheel (X Axis) Motor (kW) | 1.2 | ||||||
| Wheel (Z Axis) Motor (kW) | 1.2 | 1.8 | |||||
| Machine Weight | Net Weight (kgs) | 5200 (11440lbs) | 5600 (12320lbs) | 5800 (12760lbs) | 5800 (12760lbs) | 6300 (13860lbs) | 6700 (14740lbs) |
| Gross Weight (kgs) | 5600 (12320lbs) | 6420 (14124lbs) | 7000 (15400lbs) | 7500 (16500lbs) | 7800 (17160lbs) | 8200 (18040lbs) | |
| Package Size (L x W x H – mm) | 4520×2280×2260 (167″×90″×89″) |
4760×2280×2260 (185″×90″×89″) |
5280×2280×2280 (208″×90″×90″) |
5280×2280×2280 (208″×90″×90″) |
5610×2280×2310 (221″×90″×91″) |
6360×2280×2310 (250″×90″×91″) |
|
Make: SUPERTEC G38P-60CNC
Model: G38P-60CNC
Year: 2018
Condition: used
Equipped With:
MPG Handwheel Control
Spindle Chiller Unit
Coolant System
Hydraulic Tailstock
Features:
Fanuc Oi-TF CNC Control
Absolute/Incremental Combined Programming
Swivelable Table
Inch / Metric Conversion
Stored Stroke Check
Auto Reference Point Return
Automatic Acceleration & Deceleration
Automatic Lubrication system
Capacity:
Max Grinding Diameter: 14.17″
Max Grinding Length: 23.62″
Max load Capacity: 330 lbs
Swing Over Table: 15″
Center Distance Between Spindle & Slide Table: 24″
Distance Between Centers: 24″
Grinding Wheel:
Speed: 2000 RPM
Wheel Size: 20″ X 2″ – 4″ X 6″
Grinding Wheel Seat:
Feed Angle: 90 Degree
Maximum Feeding Speed: 236 IPM
Least Travel Increment: 0.001 Degree
Total Feeding Travel: 11.02″
Motor: 10 HP
Workhead:
Speed: 10 – 600 RPM
Center Taper: MT-4
Motor: 1.5 HP
Table:
Rotation Angle: +/- 9 Degree
Least Travel Increment: 0.001 Degree
Rapid Feed Rate: 393 IPM
Tailstock:
Tailstock Quill Stroke: 1″
Tailstock Taper: MT-4
General:
Power Source: AC 230 V / Three Phase / 60 Hz
Power Requirement: 6.5kva
Overall Dimensions: 187″ x 90″ x 90″ High Approx.
Weight: 14330 lbs Approx.
