Spinner TC800-77 CNC Turning Center C+Y Axis Chuck 12 inch – Year 2008
| Technical Specifications | TC800-77 | TC800-110 |
|---|---|---|
| GENERAL | ||
| Maximum Swing Diameter | 690 mm (27.17″) | |
| Maximum Turning Diameter | 500 mm (19.69″) | |
| Maximum Turning Length | 800 mm (31.50″) | 1500 mm (59.06″) |
| Axis Travels X / Y (Optional) / Z | X: 360 mm (14.17″) / Y: +65 / -55 mm (+2.56″ / -2.17″) / Z: 980 mm (38.58″) / 1580 mm (62.20″) | |
| Maximum Rapid Traverse Rates X / Z | 15 / 24 m/min (590 / 945 IPM) | |
| MAIN SPINDLE | ||
| Maximum Spindle Speed (Depending on Chuck Type) | 4,000 RPM | 3,000 RPM |
| Maximum Chuck Size | 315 mm (12.40″) | 500 mm (19.69″) |
| Spindle Motor Power | 18 kW | 22 kW |
| Torque | 175 / 206 Nm | 175 / 206 Nm |
| SECOND SPINDLE | ||
| Maximum Spindle Speed | 4,000 RPM | |
| Chuck Size | 210 mm (8.27″) | |
| Spindle Motor Power | 10 kW | |
| Torque | 80 Nm | |
| TAILSTOCK | ||
| Type | Turret-Controlled Moving Tailstock Body | |
| Taper Type | MK4 | |
| Quill Diameter | Body Mounted | |
| Tailstock Quill Stroke | 100 mm (3.94″) | |
| TURRET | ||
| Number of Tool Stations | 12 (VDI50) | |
| Tool Holder Type | VDI50 | |
| Available Live Tool Positions | 12 | |
| Maximum Live Tool Speed | 4,000 RPM | |
| Live Tool Motor Power (60% Duty) | 5.5 kW | |
| Live Tool Motor Torque (60% Duty) | 36 Nm | |
| OTHER | ||
| Machine Weight | 5,000 kg (11,023 lbs) | 9,000 kg (19,842 lbs) – Long Bed Version |
| Machine Dimensions (L × W × H) | 4,000 × 2,000 × 2,000 mm (157.48″ × 78.74″ × 78.74″) | |
SPINNER TC 77-800 CNC Turning Center with C & Y Axis – Year 2008
The machine is equipped with a 12″ main spindle chuck and a
10″ sub-spindle chuck, featuring both
C-axis and Y-axis capabilities for advanced milling and turning operations.
The machine is supplied with:
- 4 live tooling (C-axis) tool holders
- 4 fixed tool holders
All live tooling units have been professionally refurbished, and the bearings have been completely renewed.
The machine is equipped with the Manual Guide option.
The machine has been fully refurbished.
The following components have been replaced with original new parts:
- Turret
- Air conditioning unit
- Chip conveyor
- Hydraulic pump and motor
- Axis telescopic covers
The machine is currently under power, fully operational, and available for inspection.
Test cutting can be performed upon request.
Both chucks are manufactured by SMW AUTOBLOK.
