Reiden RX10-5X CNC 5-Axis Vertical Machining Center – Year 2016

REIDEN RX 10
5-axis machining center
with swivel milling head, pallet station,
tool calibration, heat compensation,
work area extraction, and much more.

Year of manufacture 2016
Spindle hours approx. 1,500 h (after spindle replacement beginning 2025)

Control:

Heidenhain iTNC 530 HSCI

Heidenhain DCM collision monitoring

Heidenhain HR 410 handwheel

Swiveling console with 19″ monitor

Teleservice via LAN/WLAN

Travel range:
Travel ranges X 1,000 mm, Y 1,100 mm, Z 810 mm

NC rotary table D 1,000 x 800 mm, oscillation circle 1,350 mm

Milling head:

Automatic horizontal/vertical swivel head

Fully infinitely variable NC axis from -1° to +90°

Air blast through the spindle

External cooling via nozzle ring

Drive power 38 kW (100% duty cycle)

Speed ​​16,000 rpm

Torque 135 Nm at 40% duty cycle

Spindle mount HSK 63-A

Medium supply:

Internal coolant supply 50 bar – output 28 l/min.

Paper belt filter with additional fine filter

Pressure regulation of individual tools during program run

Tool changer:

Shelf magazines with 73 stations (additional shelves can be added)

Pivoting interactive control panel

Drawer for removing and inserting tools into the tool racks

Tool measurement:

3D wireless measuring probe m&h 20.00-Multi, software adapted to HSK 63-A

Including Kinematics-Opt Compatible with the iTNC control system and calibration ball on a magnetic stand

Pallet changer:

Dual palletizing unit, pallet diameter 1,000 x 800 mm, hole pattern 100 mm x 100 mm, hardened drill bushings D 16 mm

Rotary table unit including zero-point clamping system, loading station accessible by crane.

Pallet changing unit protected by a cabin.

Special features:

Micro-Epsilon

For detection and dynamic compensation of heat-induced spindle growth

Chip conveyor

Scraper belt conveyor along the machine bed

Chip ejection height 1,100 mm

Machine cabin

Full-space protective enclosure with a large angled door for crane loading and a quick-access door. Easy removal of chips from the work area.

Extraction system

Oil and emulsion mist extraction, mechanical air filter, suction power 1,800 m³/h

Rotating viewing window

Viewing window into the work area integrated into the cabin door

Camera in the work area

Monitor and keyboard on the control panel. This allows observation of the rear machining process.

Machine data:

Space requirement (without service areas!) LxWxH approx. 4,791 mm x 4,100 mm x 4,791 mm (including extraction system)

Machine weight approx. 19,700 kg

Complete weight with all equipment, plus maximum workpiece weight, including all tools in the magazine, and all operating materials, approx. 27,730 kg

Connected load 50 kVA, 400V, 50/60 Hz

This machining center, with its exceptionally high-quality and practical equipment, is in very good condition. It operates precisely and reliably. There is no maintenance or repair backlog. Quite the opposite. With a nearly new milling spindle, the REIDEN RX 10 is well positioned for long-term use.

A viewing during operation is possible at any time by appointment.

All tools and consumables shown in the photos are not included in the scope of delivery of the machine.