| OKUMA MB-500H CNC Horizontal Machining Center with 2 Pallets – Year 2003 | ||
|---|---|---|
| Specification | Imperial | Metric |
| Manufacturer | OKUMA | |
| Model | MB-500H | |
| Machine Type | CNC Horizontal Machining Center | |
| Year of Manufacture | 2003 | |
| CNC Control | OKUMA OSP | |
| Condition | Used | |
| Functionality | Fully Functional | |
| Working Area / Axis Travels | ||
| X-Axis Travel | Approx. 31.50″ | 800 mm |
| Y-Axis Travel | Approx. 31.50″ | 800 mm |
| Z-Axis Travel | Approx. 31.50″ | 800 mm |
| Distance from Pallet Surface to Spindle Center | Approx. 2.76″ – 34.25″ | 70 – 870 mm |
| Distance from Pallet Center to Spindle Nose | Approx. 5.91″ – 37.40″ | 150 – 950 mm |
| Pallet / Table Specifications | ||
| Number of Pallets | 2 | |
| Pallet Size | Approx. 19.69″ × 19.69″ | 500 × 500 mm |
| Maximum Pallet Load | Approx. 1,102 lbs | 500 kg |
| Pallet Changer | Automatic Rotary Pallet Changer (APC) | |
| Table Indexing | 1° | |
| Pallet Surface | 24 × M16 Tapped Holes | |
| 2-Pallet Production System | Allows the Next Workpiece to be Set Up While the Machine is Running, Reducing Non-Productive Setup Time | |
| Spindle Specifications | ||
| Spindle Speed Range | 50 – 15,000 RPM | 50 – 15,000 RPM |
| Maximum Spindle Speed | 15,000 RPM | 15,000 RPM |
| Spindle Taper | SK40 / MAS 403 SK40 / BT40 | |
| Spindle Motor Power | Approx. 34.9 HP / 24.8 HP Continuous | 26 kW / 18.5 kW Continuous |
| Spindle Bearing Diameter | Approx. Ø2.76″ | Ø70 mm |
| Through-Spindle Coolant | Yes (TSC) | |
| Automatic Tool Changer | ||
| ATC Magazine Capacity | 40 Tools | |
| Tool Holder | MAS SK40 / BT40 | |
| Tool Selection | Memory Random | |
| Maximum Tool Diameter | Approx. Ø2.95″ | Ø75 mm |
| Maximum Tool Diameter Without Adjacent Tools | Approx. Ø5.71″ | Ø145 mm |
| Maximum Tool Length | Approx. 13.78″ | 350 mm |
| Maximum Tool Weight | Approx. 17.64 lbs | 8 kg |
| Feed Rates | ||
| Rapid Traverse | Approx. 295 ft/min | Up to 90 m/min |
| Cutting Feed Rate | Approx. 0.04 – 2,362 in/min | 1 – 60,000 mm/min |
| Equipment & Accessories | ||
| Automatic Pallet Changer (APC) | Included | |
| Pallets | 2 × Approx. 19.69″ × 19.69″ | 2 × 500 × 500 mm |
| Through-Spindle Coolant (TSC) | Included | |
| Chip Conveyor | Included | |
| Automatic Tool Changer | Included | |
| Tool Magazine | 40-Tool Magazine | |
| Coolant System | Included | |
| Full Machine Enclosure | Included | |
| Condition & Inspection | ||
| Current Operating Status | Fully Operational | |
| Maintenance | Used in Owner’s Production and Reported as Regularly Maintained | |
| Inspection | Available for Inspection Under Power in Croatia by Appointment | |
| Test Run | Available by Appointment | |
| Additional Documentation | Additional Photos, Videos and Information Available on Request | |
| Loading / Transport | Can Be Discussed Separately | |
CNCBUL Industrial Machinery Solutions
Global Industrial Machine Solutions & Investment Advisory
Latest Guest Posts
Buying Guide
REQUEST MACHINE INSPECTION : used Amada LC3015 F1NT CNC Laser Machine 4kW – Year 2006 made in Japan
Home › Blog › Buying Guide › REQUEST MACHINE INSPECTION : used Amada LC3015 F1NT CNC Laser Machine 4kW –…
Read Guest Post →
Buying Guide
REQUEST MACHINE INSPECTION : used Matsuura VX-1000 CNC Vertical Machining Center Spindle 20,000 rpm – Year 2013 made in Japan
Home › Blog › Buying Guide › REQUEST MACHINE INSPECTION : used Matsuura VX-1000 CNC Vertical Machining Center Spindle 20,000…
Read Guest Post →
Buying Guide
REQUEST MACHINE INSPECTION : used Quintus Technologies AVURE (ASEA) QRL-63 Fluid Cell Forming Deep Drawing Cavity Forming Hydroform Press 6610 Ton
Home › Blog › Buying Guide › REQUEST MACHINE INSPECTION : used Quintus Technologies AVURE (ASEA) QRL-63 Fluid Cell Forming…
Read Guest Post →