| OKUMA MB-4000H CNC 4-Axis Horizontal Machining Center 2-Pallet Changer System – Year 2018 |
||
|---|---|---|
| Specification | Imperial | Metric |
| Manufacturer / Brand | OKUMA | |
| Model | MB-4000H | |
| Year of Manufacture | 2018 | |
| Installed New | 2019 | |
| Condition | Used | |
| Machine Type | CNC 4-Axis Horizontal Machining Center | |
| CNC Control | Okuma OSP P-300MA | |
| OPERATING HOURS | ||
| Operating Hours | 7,824 Hours | |
| Spindle Run Hours | 5,340 Hours | |
| Cutting Hours | 4,112 Hours | |
| PALLET & WORKPIECE CAPACITY | ||
| Pallet Changer | 2-Pallet Changer System | |
| Number of Pallets | 2 | |
| Pallet / Table Size | 15.75″ × 15.75″ | 400 × 400 mm |
| Maximum Workpiece Dimensions | 23.62″ × 35.43″ | 600 × 900 mm |
| Maximum Table Load | 880 lbs | Approx. 400 kg |
| Rotary Table | Full 4th Axis Rotary Table | |
| Pallet / B-Axis Indexing | 0.001° Full 4th Axis | |
| AXIS TRAVELS | ||
| X-Axis Travel | 22.05″ | 560 mm |
| Y-Axis Travel | 22.05″ | 560 mm |
| Z-Axis Travel | 24.61″ | 625 mm |
| Spindle Center to Table Top | 1.97″ – 24.02″ | 50 – 610 mm |
| Spindle Nose to Pallet Center | 3.35″ – 27.95″ | 85 – 710 mm |
| SPINDLE | ||
| Spindle Speed Range | 50 – 15,000 RPM | |
| Spindle Taper | CAT 40 | |
| Spindle Motor Power | 35 HP | Approx. 26.1 kW |
| Spindle Chiller Unit | Included | |
| Rigid Tapping | Included | |
| FEED RATES | ||
| Rapid Traverse Rate | 2,362 IPM | Approx. 60 m/min |
| Maximum Cutting Feed Rate | 2,362 IPM | Approx. 60 m/min |
| AUTOMATIC TOOL CHANGER | ||
| Tool Magazine Capacity | 60-Station Automatic Tool Changer | |
| Maximum Tool Diameter | 5.91″ | Approx. 150 mm |
| Maximum Tool Length | 11.81″ | Approx. 300 mm |
| Maximum Tool Weight | 22 lbs | Approx. 10 kg |
| COOLANT & CHIP MANAGEMENT | ||
| High Pressure Coolant Through Spindle | 1,000 PSI | Approx. 69 bar |
| High Pressure Coolant System | MP Systems | |
| Flood Coolant | Included | |
| Chip Conveyor | Included | |
| Mist Collector | Losma Mist Collector System | |
| PROBING & CONTROL FEATURES | ||
| Part Probing System | Renishaw OMP400 Spindle-Mounted Part Probe | |
| Remote Jog Handle | Included | |
| USB Port Interface | Included | |
| RS-232 Port Interface | Included | |
| ELECTRICAL & CONSTRUCTION | ||
| Electrical | Wired 220 / 480 V | |
| Transformer | Included | |
| Guideway Design | Linear Guide Rail Design | |
| MACHINE DIMENSIONS & WEIGHT | ||
| Machine Dimensions (L × W × H) | 186″ × 96″ × 106″ | Approx. 4,724 × 2,438 × 2,692 mm |
| Machine Weight | 21,000 lbs | Approx. 9,525 kg |
| EQUIPPED WITH | ||
| Equipment & Accessories | Okuma OSP P-300MA CNC Control 2-Pallet Changer System Full 4th Axis Rotary Table 60-Station Automatic Tool Changer 15,000 RPM Spindle MP Systems 1,000 PSI High-Pressure Coolant Through Spindle Renishaw OMP400 Spindle-Mounted Part Probing System Chip Conveyor Losma Mist Collector System Flood Coolant System Rigid Tapping Spindle Chiller Unit Remote Jog Handle USB Port Interface RS-232 Port Interface Transformer Linear Guide Rail Design |
|
CNCBUL Industrial Machinery Solutions
Global Industrial Machine Solutions & Investment Advisory
Latest Guest Posts
Buying Guide
REQUEST MACHINE INSPECTION : used Amada LC3015 F1NT CNC Laser Machine 4kW – Year 2006 made in Japan
Home › Blog › Buying Guide › REQUEST MACHINE INSPECTION : used Amada LC3015 F1NT CNC Laser Machine 4kW –…
Read Guest Post →
Buying Guide
REQUEST MACHINE INSPECTION : used Matsuura VX-1000 CNC Vertical Machining Center Spindle 20,000 rpm – Year 2013 made in Japan
Home › Blog › Buying Guide › REQUEST MACHINE INSPECTION : used Matsuura VX-1000 CNC Vertical Machining Center Spindle 20,000…
Read Guest Post →
Buying Guide
REQUEST MACHINE INSPECTION : used Quintus Technologies AVURE (ASEA) QRL-63 Fluid Cell Forming Deep Drawing Cavity Forming Hydroform Press 6610 Ton
Home › Blog › Buying Guide › REQUEST MACHINE INSPECTION : used Quintus Technologies AVURE (ASEA) QRL-63 Fluid Cell Forming…
Read Guest Post →