| Max. Machining Capabilities |
Machining Diameter |
Ø20 mm (Option: Ø25 mm) |
| Machining Length |
200 mm / 1 chuck |
| Max. Parts Unloading Length |
105 mm *(1) |
| Main Spindle |
Main Spindle Through-Hole Diameter |
Ø24 mm (Option: Ø27 mm) |
| Main Spindle RPM |
10,000 r.p.m max. / 6,000 r.p.m max. |
| $1 Tooling |
Max. No. of Tools (Standard) |
17 |
| OD Tool (□12.7 × 150 mm max.) |
5 (6 Option) |
| ID Frontal Hole ER16 |
4 |
| Live Tool ER16 |
4 (5 Option) |
| Max. Frontal Drill Diameter |
Ø10 mm |
| Max. Frontal Drill Length |
40 mm *(2) |
| Max. Frontal Tap Diameter |
M8 |
| Max. Live Tool Spindle Drill Diameter |
Ø8 mm |
| Max. Live Tool Spindle Tap Diameter |
M6 |
| Live Main Tool Spindle |
6,000 r.p.m max. |
| $2 Back Tooling |
OD Tool (□10 × 80 mm max.) |
1 |
| ID Frontal Hole ER16 |
3 |
| Max. Frontal Drill Diameter |
Ø8 mm |
| Max. Frontal Tap Diameter |
M6 |
| ID / Off-Center Drill (Option) |
2 / 2 |
| Max. ID / Off-Center Drill Diameter (Option) |
Ø8 mm / Ø6 mm |
| Max. ID / Off-Center Tap Diameter (Option) |
M6 / M5 |
| Feed & Control |
Feed Rate |
30 m/min. |
| Min. Command Unit |
0.0001 mm |
| C-Axis Min. Command Unit ($1 / $2) |
0.0001° |
| Motor |
Main Spindle Motor |
2.2 / 3.7 kW |
| Live Tool Motor |
0.75 kW |
| Back Main Spindle Motor |
0.75 kW |
| Back Live Tool Motor (Option) |
0.4 kW |
| X1, Z1 |
1.0 kW |
| Y1, X2, Z2 |
0.5 kW |
| Coolant Pump |
0.25 kW |
| Lubricant Pump |
0.003 kW |
| Main Spindle Center Height |
1,000 mm |
| Dimensions & Others |
Input Power Capacity |
12 KVA |
| Pneumatic Pressure & Flow Rate |
0.6 MPa, 50 L/min |
| Coolant Tank |
110 L |
| Lubricant Tank |
0.8 L |
| Dimensions (W × D × H) |
2,140 × 1,030 × 1,680 mm |
| Weight |
2,135 kg |
| Main Spindle Center Height |
1,000 mm |
| NC Standard Functions |
MITSUBISHI NC |
M70A |
| NC Display |
8.4″ Color TFT LCD |
| Machining Program Memory Capacity |
600 m |
| Number of Tool Offset Corrections |
40 pcs. |
| Background Programming Editing Function |
Standard |
| Main Spindle C-Axis Function ($1, $2) |
Standard |
| User Macro Function |
Standard |
| Tool Nose Rounding Offset Function |
Standard |
| Corner Chamfering / Corner Rounding |
Standard |
| Fixed Cycle |
Standard |
| Complex Fixed Cycle |
Standard |
| Geometric Commands |
Standard |
| Operation Manual |
Standard |
| Serial In/Output Interface |
Standard |
| CF Card Interface |
Standard |
| Notes |
*(1) |
In use of rotary back tool unit: 70 mm |
| *(2) |
In use of drill holder for deep hole: 70 mm |
| Standard Accessories |
- Synchronous rotary guide bush 20
- Synchronous rotary guide bush drive unit
- 4 Live tool unit
- Frontal 4-drill attachment
- Tool holder □12.7 (4 pcs.)
- Tool holder □12.7 for cut-off (1 pce.)
- Back tool unit (OD comb Tool ×1, ID Tool ×3)
- Main: Chuck sleeve / spring / spindle cap
- Back: Chuck sleeve / spring / spindle cap
- Drill holder Ø22-10-70 (3 pcs.)
- Tap holder Ø22-94L (1 pce.)
- Main spindle cooling unit ($1)
- Main spindle air-purge ($2)
- Automatic lubricator (w/level detection)
- Coolant oil unit
- Coolant oil cut-off detector
- Cut-off tool breakage detector
- Door safety interlock
- Lightning surge protection function
- Main spindle load detection mode
- Automatic power interception
- Working light (High luminance LED)
- Parts catcher ($2)
- Leveling pads
|
| Optional Accessories |
- Fixed guide bush 20 / 25
- Synchronous rotary guide bush 25
- Sleeve for synchronous rotary guide bush
- $1: 5 Live tool unit
- $1: 3 Off-center-drill unit (E unit)
- $1: Tool holder □12.7 (additional)
- $1: Tool holder □12.7 for cut-off (additional)
- $1: Drill holder for deep hole
- $1: Tap holder for deep hole
- $2: Rotary back tool unit (ID Tool ×2, Off-center-drill ×2)
- $2: Back tool holder (OD comb Tool)
- ALPS TOOL NA nut
- REGO-FIX ERM nut
- Tool presetter
- Manual pulse generator
- NC display language (English / Chinese / Korean)
- Parts catcher
- Pipe type parts unloader (I.D. Ø13 mm or less)
- Large-sized lubricant pump 1.8 L
- Override switch
- Tap breakage detector ($1)
- Parts conveyor
- Hanger bolt
- Medium pressure coolant
- Automatic fire extinguisher
- Oil mist collector
- Tooling
- Parts box
|
