MURATEC Murata MT12
CNC Twin Turret Double Spindle Turning Center with Bar Feeder – Year 2005
| Category | Specification | Metric | Imperial |
|---|---|---|---|
| Machine Information | Manufacturer | MURATEC / Murata Machinery | |
| Model | MT12 | ||
| Machine Type | CNC Twin Turret / Double Spindle Turning Center | ||
| Year of Manufacture | 2005 | ||
| CNC Control | FANUC 16-TC | ||
| Turning Capacity | Maximum Turning Diameter | Ø210 mm | Ø8.27 in |
| Maximum Bar Diameter | Ø45 mm | Ø1.77 in | |
| Axis Travels | X1-Axis Travel | 200 mm | 7.87 in |
| X2-Axis Travel | 200 mm | 7.87 in | |
| Z1-Axis Travel – Left Side | 200 mm | 7.87 in | |
| Z2-Axis Travel – Right Side | 650 mm | 25.59 in | |
| Spindles | Spindle Configuration | Double Spindle / Twin Spindle | |
| Maximum Spindle Speed | 4,500 rpm | ||
| Spindle Power | 2 × 11 kW | 2 × 14.75 HP | |
| Total Installed Spindle Power | 22 kW | 29.50 HP | |
| Spindle Nose | A2-5 | ||
| Spindle Bore | Not Specified | ||
| Maximum Bar Capacity | Ø45 mm | Ø1.77 in | |
| Rapid Traverse | X-Axis Rapid Traverse | 24 m/min | 944.88 in/min |
| Z-Axis Rapid Traverse | 24 m/min | 944.88 in/min | |
| Right Spindle Rapid Traverse | 32 m/min | 1,259.84 in/min | |
| Twin Turret System | Number of Turrets | 2 | |
| Turret Configuration | Twin Turret | ||
| Tool Stations per Turret | 15 Tools | ||
| Total Tool Stations | 30 Tool Positions (2 × 15) | ||
| Turret Type | Driven / Live Tool Turrets | ||
| Tool Interface | VDI 40 | ||
| Turret Indexing Time | 0.25 sec. | ||
| Driven / Live Tools | Number of Driven Tools | 12 | |
| Driven Tool Interface | VDI 40 | ||
| Tailstock / Quill | Quill Travel | 120 mm | 4.72 in |
| Quill Taper | MT5 / Morse Taper No. 5 | ||
| Additional Specifications | Longitudinal Travel | See Z1 / Z2 Axis Travels Above | |
| Cross Travel | See X1 / X2 Axis Travels Above | ||
| Machining Configuration | Twin Spindle, Twin Turret CNC Turning with Driven / Live Tool Capability | ||
