Mikron HPM 450 U CNC 5-Axis Vertical Machining Center – Year 2016

Manufacturer:
Mikron
Model:
HPM450 U
Machine number:
107.37.00.616
Year of construction:
2016
Condition:
used
Functionality:
fully functional
Operating hours:
3,000 h

Travel distance X-axis:
600 mm
Travel distance Y-axis:
450 mm
Travel distance Z-axis:
450 mm
Rapid traverse X-axis:
30 m/min
Rapid traverse Y-axis:
30 m/min
Rapid traverse Z-axis:
30 m/min
Controller manufacturer:
Heidenhain
Controller model:
iTNC 530
Rotary table diameter:
450 mm
Rotational speed (min.):
140 rpm
Overall weight:
7,700 kg
Spindle speed (min.):
100 rpm
Spindle speed (max.):
20,000 rpm
Operating hours of spindle:
3,000 h
Coolant supply:
70 bar
Spindle motor power:
3,700 W
Spindle nose:
HSK63
Number of spindles:
1
Number of slots in tool magazine:
120
Tool length:
270 mm
Tool diameter:
80 mm
Tool weight:
6 g
Type of input current:
three-phase
Equipment:
chip conveyor

Excellent condition machine fully maintained by GF all the time we have owned it.
-Machine came out of Renault F1 when 3 years old and we bought it from GF UK after a full service and checks with 12-month warranty. We have maintained it with GF ever since
Brand New Spindle fitted less than a year ago. 2800 hours only
We also had a new Rotary table fitted at a cost of £50k three years ago

HEIDENHAIN iTNC 530 with Ethernet
X-Axis (600 mm)
Y-Axis (450 mm)
Z-Axis (450 mm)
Max Workpiece Size: (450mm) Dia x (450mm) height x (150kg)
B-Axis (Tilt) -120 / +45 degrees
C-Axis (Rotary) x 360 degrees

FEED DRIVE
Drive: Ball screws in X, Y, Z-axis
Drive: Direct Drive Torque Motors in B and C-axis
Rapid Traverse X/Y/Z (22 m/min)
Table Rapid Speed B-Axis (Tilt)50 rpm
Table Rapid Speed C-Axis (Rotary)140 rpm
Maximum Acceleration X/Y/Z up to 5 m/sec2
DIRECT DRIVE TORQUE MOTOR RTT (ROTARY TILT TABLE) DYNAFIX
System 3R Dynafix with 7 x pallet stations
(350 x 350 mm) maximum pallet size possible
Maximum workpiece weight (150 kg)
With hydraulic clamping in turning and swivelling axis
All feed motors are liquid-cooled
120 POSITION TOOL TOWER
Number of magazine places – 120 positions
Spindle taper – HSK-A63
Maximum tool diameter (80 mm)
Maximum tool diameter with unoccupied adjacent positions. (125 mm)
Maximum tool length (270 mm)
Maximum permitted tool weight (6 kg)
Number of pockets for tool length up to (270 mm)70
Number of pockets for tool length up to (160 mm)50
WEIGHT
Including pallet changer – Approximately (7,700 kg)
Machine base – Polymer concrete (man-made granite)
STEP-TEC SWISS MADE SPINDLE
Spindle taper-HSK-A63
Spindle RPM- 100-20,000 rpm
Spindle power – 40 HP (38 kW)
Spindle torque 40% ED – 67 Ft/Lb (91 Nm)
Maximum tool diameter – (80 mm)
Maximum tool length from the spindle nose (350 mm)
Maximum tool weight- (6 kg)
EQUIPPED WITH:
(600 l) band filter coolant tank with micro paper filtration system
-18-80 bar (261-1,160 PSI) adjustable high-pressure Coolant Thru Spindle (CTS)
-Flow rate 5.3 gallon/min (20 l/min). Unit is a KNOLL KF400|FKA/600 Litre
Lift up scraper chip conveyor for aluminium machining
M&H Infrared touch probe
BLUM laser tool measuring system
Tool blow-off unit
Blow-off unit for laser measuring system
Tilting the working plane:
This option activates the optional HEIDENHAIN software cycle 19
“APS” Option (Advance Process System)
“ITC” Option (Intelligent Thermal Control)
“ITC-5X” Option (Intelligent Thermal Control for 5 axis)
External spindle chiller